Description
The Zaffiri Precision ZPS.2 for the Glock 19 Gen 5 isn't just a bare slide. This SKU ships as a full upper assembly, so instead of hunting down a barrel, recoil spring, and internals separately, you get everything set up and ready to bolt onto a compatible Gen 5, G19X, or G45 frame. The slide itself is machined from a single billet of 17-4 stainless steel at Zaffiri's shop in Largo, Florida, and finished in black Cerakote. The tight tolerances they build to are what give these slides their reputation for clean lockup and improved consistency downrange.
What's Cut Into the ZPS.2 Slide
The ZPS.2 profile runs two lightening windows on each side ahead of the ejection port plus aggressive mini-ports along the top edges, with standard rear serrations for grip during press checks and clearing. There's no top port on this platform, so the muzzle stays clean. The RMR-footprint optic cut is machined forward of the factory rear-sight dovetail, which means it plays nice with Trijicon RMR and SRO optics as well as Holosun 407c and 507c models, and the included blank iron sights give you a lower 1/3 co-witness.
Threaded Barrel and the Full Package
This configuration comes with a threaded black nitride barrel, so if a compensator or suppressor is in your future, you're already set. Alongside the barrel you get an installed upper parts kit, recoil assembly, the RMR cover plate with mounting screws, and the blacked-out co-witness sights. It's about as close to plug-and-play as an aftermarket upper gets.
Fitting the ZPS.2 to Your Glock
One thing worth knowing: this is a Gen 5 assembly and belongs on Gen 5 pattern frames. It uses Gen 5 specific geometry, and non-Gen 5 flush-and-crown barrels won't work here. Once it's on the frame, confirm lockup and function, then zero your red dot or run the irons and you're good to go.
Key Specifications
- Manufacturer: Zaffiri Precision
- Model: ZPS.2
- Manufacturer Part Number: CU-G19G5-ZPS2-RMR-BLK-TH-BN-BLNK
- UPC: 810220067048
- Product Type: Complete Slide / Upper Assembly
- Fitment: Glock 19 Gen 5, G19X, G45
- Slide Material: Single billet 17-4 stainless steel
- Finish: Black Cerakote
- Optic Cut: RMR footprint (Trijicon RMR/SRO, Holosun 407c/507c)
- Barrel: Threaded, black nitride
- Iron Sights: Blacked-out, lower 1/3 co-witness
- Slide Profile: Side lightening windows, top mini-ports, no top port
- Origin: Made in USA (Largo, FL)
What’s Included
- ZPS.2 billet stainless slide in black Cerakote
- Threaded black nitride barrel
- Installed upper parts kit
- Recoil spring assembly
- Blacked-out co-witness iron sights
- RMR-cut cover plate
- Optic mounting screws
Frequently Asked Questions
Is the Zaffiri ZPS.2 a stripped slide or a complete assembly?
This particular SKU is a complete upper assembly, not a bare slide. It comes with the barrel, upper parts kit, recoil assembly, cover plate, screws, and blacked-out co-witness iron sights already set up. You drop it onto a compatible frame, check function, and run it.
Which Glock frames does this ZPS.2 fit?
It's built for Gen 5 geometry, so it fits the Glock 19 Gen 5, G19X, and G45 frames. It will not work on a Gen 3 frame, and non-Gen 5 flush-and-crown barrels are too short for this platform. Always match the generation of the slide to your frame.
What optics work with the RMR cut on this ZPS.2 slide?
The optic cut uses the RMR footprint, so it accepts the Trijicon RMR and SRO along with the Holosun 407c and 507c and other similar-footprint red dots. The cut sits forward of the rear dovetail, which lets the included blank irons give you a lower 1/3 co-witness. A cover plate is included for running it without a dot.
Why does this ZPS.2 come with a threaded barrel?
The threaded barrel lets you add a compensator or suppressor down the road without swapping anything out. If you'd rather keep a clean muzzle, Zaffiri offers this same slide in a flush-and-crown configuration instead. The ZPS.2 profile itself is not ported, so the muzzle setup is entirely up to the barrel you run.






Reviews
There are no reviews yet.