Description
This is the Zaffiri Precision ZPS.2 complete slide for the Glock 19 Gen 3, and it takes a lot of the guesswork out of building a custom upper. Instead of sourcing a stripped slide, barrel, sights, and small parts piece by piece, you get the whole package assembled and matched to fit right out of the box. The slide itself is machined from a single billet of 17-4 stainless steel with tight tolerances, which is where the improved lockup and repeatable accuracy come from. It carries the clean ZPS.2 profile with front and rear serrations and a window cut on each side for a little weight reduction and a sharp look.
What the ZPS.2 Upper Brings to Your G19 Build
The RMR optic cut is machined forward of the factory rear sight dovetail, so it accepts Trijicon RMR and SRO optics along with the Holosun 407c and 507c and other red dots that share the RMR footprint. A black anodized cover plate and the correct mounting screws come along for the ride, so you can run it capped off until your optic shows up. The threaded barrel opens the door to a suppressor or compensator whenever you want to add one down the line.
Fitment and Compatibility Notes for the ZPS.2 Slide
This upper is designed for the Glock 19 Gen 3 frame and also plays nice with compatible aftermarket frames in the same geometry, like the Polymer80 PF940c. One thing worth knowing up front: the ZPS.2 is not ported compatible, so if you are chasing a ported setup you would want to look at the ZPS.P or ZPS.4 instead. It is built to run on OEM recoil spring weight, though heavier optics or a suppressor can call for tuning the spring.
Everything is 100% American made and manufactured in-house at Zaffiri's facility in Largo, Florida. It is a solid pick for anyone who wants a finished, optics-ready upper without the custom shop lead time.
Key Specifications
- Manufacturer: Zaffiri Precision
- Model: ZPS.2
- Manufacturer Part Number: CU-G19G3-ZPS2-RMR-BLK-TH-BN-BLNK
- UPC: 810220066744
- Product Type: Complete Slide / Upper
- Fit: Glock 19 Gen 3 (and compatible aftermarket frames)
- Slide Material: Single billet 17-4 stainless steel
- Finish: Black Cerakote certified coating
- Optic Cut: RMR footprint (Trijicon RMR/SRO, Holosun 407c/507c)
- Barrel: Threaded, black nitride
- Serrations: Front and rear
- Ported Compatible: No
- Recoil Spring: OEM weight
- Country of Origin: USA (Largo, FL)
What’s Included
- ZPS.2 slide for Glock 19 Gen 3
- Threaded barrel
- Upper parts kit
- Black anodized RMR cover plate
- Optic mounting screws
Frequently Asked Questions
Will the ZPS.2 complete slide fit my Glock 19 Gen 3?
Yes, this upper is designed for the Glock 19 Gen 3 frame. It also works with compatible aftermarket frames built to the same geometry, such as the Polymer80 PF940c. It is a good idea to verify fitment on your specific frame before heading to the range.
What optics work with the ZPS.2 RMR cut?
The optic cut is machined for the RMR footprint, so it accepts the Trijicon RMR and SRO as well as the Holosun 407c and 507c and other red dots that share that pattern. The mounting position sits forward of the factory rear sight dovetail. A cover plate and the correct screws are included so you can run it capped until your optic arrives.
Can I run a suppressor or compensator on this slide?
This upper ships with a threaded barrel, so it is set up to accept a suppressor or compensator when you want one. Keep in mind that adding a can or a heavier optic may call for tuning your recoil spring weight, since the slide is built to run on OEM spring weight out of the box.
Is the ZPS.2 compatible with ported barrels?
No, the ZPS.2 is not ported compatible. If you are after a ported setup, Zaffiri's ZPS.P and ZPS.4 slides are the ones built for their ported barrels. This model is meant for a clean, non-ported build.







Reviews
There are no reviews yet.