Description
This is the complete version of Zaffiri Precision's ZPS.2 slide, built specifically for the Glock 17 Gen 3 frame and finished with a threaded barrel for guys who want the option to run a compensator or suppressor down the road. Everything here is machined from a single billet of 17-4 stainless steel rather than stamped or cast, which is what gives these slides their tight tolerances and clean lockup. The whole thing is manufactured in-house at Zaffiri's Largo, Florida facility, so you're not dealing with an overseas parts bin build.
The ZPS.2 Complete Slide Ships Ready to Drop In
Unlike the stripped versions of this slide, this one shows up ready to install. It comes with the threaded barrel, a Gen 3 upper parts kit with a polymer recoil spring assembly, and factory-style sights already installed. You're not sourcing a channel liner or hunting down small parts separately, it's built as a full upper so you can pull your factory slide off and have this one running the same day.
Machined Windows and Serrations on This Glock 17 Slide
Zaffiri didn't just cut an optic footprint into a stock-shaped slide. The top and sides carry their signature lightening cuts, which trim some mass off the slide for a bit of a snappier cycle and help pull heat away from the barrel during longer range sessions. Up front and at the rear you'll find deep, angled serrations that make press checks and manipulation a lot easier, especially with gloved or sweaty hands.
RMR-Cut Optic Footprint Without Extra Plates
The slide is pre-milled for the RMR footprint, which covers Trijicon RMR and SRO along with Holosun's 407c, 507c, and 508T. Zaffiri includes the correct mounting screws for the cut along with a black anodized cover plate, so if you're not running a dot yet the slide still sits clean and sealed. When you do add an optic, the lower thirds co-witness lines up well with suppressor height sights for a natural transition.
Key Specifications
- Manufacturer: Zaffiri Precision
- Model: ZPS.2
- Manufacturer Part Number: CU-G17G3-ZPS2-RMR-BLK-TH-BN-BLNK
- UPC: 810220066447
- Fitment: Glock 17 Gen 3 frames (also compatible with Gen 1/Gen 2 and Polymer80 PF940v2)
- Slide Material: 17-4 stainless steel, single billet construction
- Finish: Black Nitride
- Optic Cut: RMR footprint, compatible with Trijicon RMR/SRO and Holosun 407c/507c/508T
- Barrel: Threaded, included
- Assembly Type: Complete slide, fully assembled
- Sights: Factory-style sights installed
- Country of Origin: United States (Largo, FL)
- Color: Black
What’s Included
- Complete ZPS.2 slide assembly (17-4 stainless steel, black nitride finish)
- Threaded barrel
- Gen 3 upper parts kit with polymer recoil spring assembly
- Installed sights
- Black anodized optics cover plate and mounting screws
Frequently Asked Questions
Does the ZPS.2 complete slide come fully assembled or do I need to add my own internals?
This version comes fully assembled with the barrel, internals, and sights already installed. You just remove your factory Glock 17 slide and drop this one on in its place.
What frames will this ZPS.2 slide fit?
It is built for the Glock 17 Gen 3 frame, and it is also compatible with earlier Gen 1 and Gen 2 frames as well as compatible Polymer80 PF940v2 frames. Just double check your frame generation before ordering since fit is specific to Gen 3 dimensions.
Can I mount a red dot on this slide right out of the box?
Yes, the slide is pre-milled with the RMR footprint, which fits Trijicon RMR and SRO optics along with Holosun 407c, 507c, and 508T models. Mounting screws are included, and a cover plate comes on it if you decide to run it without an optic.
Why choose the threaded barrel option over the standard flush barrel?
The threaded barrel gives you the option to add a compensator or suppressor later without having to buy a separate barrel. It is the same quality build as the standard barrel, just with threading cut into the muzzle end.






Reviews
There are no reviews yet.