$160.55
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
This is the barrel to reach for when you want your Gen 5 Glock 19 to shoot tighter and look sharp doing it. Zaffiri Precision builds these from 416R stainless steel, then stress relieves and heat treats them to a hardness of RC 40 to 42 so they hold up round after round. The 3.95" length sits flush with the end of your slide with an inward crown shape, giving you that clean, finished profile a lot of folks prefer over a factory barrel poking out past the slide. It's cut for 9mm with a 1:10 twist that stabilizes the common bullet weights you'll be feeding it.
The accuracy gains come down to the details. A polished chamber and bore work with the target crown to deliver consistent bullet exit and tighter groups, and the oversized lock-up area gives you a more repeatable fit into the slide. The polished feed ramp helps it run smooth with lead, plated, or jacketed ammo, so you're not stuck babying it with one specific load. That flush and crown design also tucks the crown inward, which helps protect the rifling from dings.
The titanium nitride coating is where the gold color comes from, and it's more than just eye candy. TiN adds hardness and corrosion resistance while giving your build that bright accent that pops against a black slide. It's compatible with Glock 19, 19X, and 45 Gen 5 pistols, and it wears the signature large ZP logo machined on the port side of the lockup.
Installation is about as easy as it gets. Make sure your pistol is unloaded, field strip it, swap the factory barrel for this one, reassemble, and run a quick function check. No fitting, no gunsmith, no drama. Whether you're putting together a competition gun, a carry setup, or just want to freshen up a stock G19, this is a straightforward upgrade that pays off at the range.
Yes, this barrel is built specifically for the Gen 5 platform and fits the Glock 19, 19X, and 45 Gen 5 pistols. It's a true drop-in design, so it works with your factory Gen 5 slide with no fitting required. Just field strip, swap it in, reassemble, and run a function check.
No gunsmith needed. This is a drop-in upgrade with an oversized lock-up area engineered to fit your slide right out of the box. If you can field strip your Glock, you can install this barrel in a couple of minutes.
The polished chamber and bore are made to handle lead, plated, and jacketed ammunition, so you've got flexibility on what you feed it. That makes it a solid choice whether you're running range loads or defensive rounds. The 1:10 twist stabilizes common 9mm bullet weights well.
The gold color comes from a titanium nitride (TiN) coating, which does more than look good. TiN adds surface hardness and corrosion resistance on top of the 416R stainless construction. So you get a bright accent for your build along with real durability benefits.
| UPC | 810220063408 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BA-G19G5-FC-GLD |
| Barrel Length | 3.95" |
| Caliber/Gauge | 9mm |
| Color | Gold |
| Product Type | Barrel |
You must be logged in to post a review.
Reviews
There are no reviews yet.