Description
Quick-detach suppressor mounts have a habit of being bulky, heavy, or fussy. Yankee Hill went the other direction with the sRx Short Muzzle Brake. This is the 5/8-24 version, machined from steel and wearing a durable black phosphate finish, and it keeps things simple: thread it on, no shims, no timing, no crush washers to fight with. Since there is nothing to clock, installation takes minutes, and the brake ports still do their job taming recoil and muzzle rise when you are running the rifle without a can.
How the sRx Short Brake Locks Up
The magic is in the taper. YHM cut a large taper seal ahead of the threads, and when you spin the sRx Adapter (YHM-4400, sold separately) down onto the brake, that taper wedges everything into solid, repeatable alignment while sealing off the threads from gas and carbon. That means no baked-on fouling gluing your suppressor to the mount, and no gritty threads after a long range day. There are no springs, latches, or moving parts to wear out either, just steel on steel doing its thing.
Built for the YHM sRx System and HUB Cans
The sRx Adapter threads into the industry standard 1-3/8×24 HUB pattern, so this mount plays nice with a huge range of suppressors, including YHM's own lineup. The short brake keeps added length and weight to a minimum, so your suppressed setup stays trim instead of turning into a boat oar. It can also be permanently attached to the barrel if your build calls for it.
A Smart Pick for Your Suppressed 5/8-24 Build
If you already run one sRx Adapter on your can, adding one of these brakes to each rifle means swapping your suppressor between guns takes seconds. Like everything YHM makes, it is backed by their lifetime warranty, which is a nice bit of peace of mind on a part that lives in the hottest, dirtiest spot on your rifle.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Model: sRx Short Q.D. Muzzle Brake
- Manufacturer Part Number: YHM-4445-MB-24
- UPC: 841812101796
- Thread Pattern: 5/8"-24 tpi
- Caliber/Gauge: .308 / 7.62 NATO
- Material: Steel
- Finish: Black Phosphate
- Color: Black
- Suppressor Interface: 1-3/8"x24 HUB via sRx Adapter (YHM-4400)
- Timing Required: No shimming or timing needed
- Moving Parts: None
- Warranty: YHM Lifetime Manufacturer Warranty
What’s Included
- YHM sRx Short Q.D. Muzzle Brake, 5/8-24
Frequently Asked Questions
Do I need anything else to mount my suppressor to the sRx Short Brake?
Yes, this brake is one half of the system. You also need the YHM sRx Adapter (YHM-4400), which threads into your suppressor's 1-3/8×24 HUB mount and then locks down onto the brake's taper. The brake alone will still function as a standard muzzle brake, but suppressor mounting requires the adapter.
Does the sRx Short Muzzle Brake need to be timed or shimmed?
No, and that is one of its best features. Since the mounting system indexes on the taper rather than the brake's orientation, you can thread it on without shims, crush washers, or clocking. Just torque it down and you are set.
Will this work with suppressors from other brands?
As long as your suppressor accepts the industry standard 1-3/8×24 HUB thread pattern, you can run the sRx Adapter in it and mount up to this brake. That covers a wide range of modern cans beyond YHM's own lineup. Double check your suppressor's rear mount threading before ordering.
How does the taper seal help compared to a regular thread mount?
The large taper sits in front of the threads and seals off gas flow when the adapter is tightened down. That keeps carbon and debris from baking onto the threads, so your suppressor comes off easily instead of seizing up after heavy shooting. It also gives you consistent, repeatable alignment every time you remount.






Reviews
There are no reviews yet.