Description
Suppressing a 10mm pistol takes the right piston, and this one from Yankee Hill Machine gets the job done without any fuss. The YHM-2062-24 is cut for 9/16×24 threads, the standard pitch on most threaded 10mm barrels, and it fits the YHM booster housing (YHM-2055) along with a long list of popular pistol suppressors from other makers. If you have been running your can on 9mm or .45 hosts and want to bring a 10mm into the rotation, this is the part that makes it happen.
Built From 17-4 Stainless for the Long Haul
YHM machines these pistons from heat treated 17-4 stainless steel, which is a smart choice for a part that lives in the dirtiest, hottest spot on the whole gun. It shrugs off carbon, corrosion, and the constant battering that comes with cycling a booster assembly shot after shot. At 1.40 ounces it adds barely anything to the front end, and the machining is clean enough that it threads on smooth every time.
Ten Adjustment Points to Keep Your Zero
One of the more useful features on this Nielsen piston is the set of 10 adjustment points built into the design. If mounting your suppressor shifts your point of impact, you can index the piston to walk that shift back out and keep your rounds landing where the sights say they should. It is a small detail that makes a real difference when you care about accuracy with the can on.
Compatibility Notes on the YHM Nielsen Piston
Beyond the YHM booster assembly and R9, this piston pattern plays well with widely used suppressors like the SilencerCo Octane and Omega K series, Rugged Obsidian line, and Dead Air Odessa 9. One heads up: it works with the Sidewinder M2 but not the original first generation Sidewinder, which uses its own proprietary piston. Match the 9/16×24 threads to your barrel, drop it in your booster, and go shoot.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-2062-24
- UPC: 841812102724
- Caliber: 10mm
- Thread Pitch: 9/16×24
- Material: Heat treated 17-4 stainless steel
- Weight: 1.40 oz
- Adjustment Points: 10 (for point of impact correction)
- Booster Compatibility: YHM Booster Housing YHM-2055
- Suppressor Compatibility: YHM Sidewinder M2, R9, and many popular pistol suppressors
What’s Included
- YHM Nielsen Piston, 10mm 9/16×24 (YHM-2062-24)
Frequently Asked Questions
Will the YHM Nielsen Piston work with suppressors from other brands?
Yes, this piston pattern is compatible with a good range of popular pistol suppressors beyond YHM's own lineup, including the SilencerCo Octane and Omega K series, Rugged Obsidian models, and the Dead Air Odessa 9. Always double check your specific can's piston spec before ordering, but if it takes a standard Nielsen-style piston, chances are good this will run in it.
Does this piston fit the original YHM Sidewinder?
No. The first generation Sidewinder uses its own proprietary piston, so this one will not fit. It does work with the Sidewinder M2, the YHM Booster Assembly (YHM-2055), and other compatible pistol suppressors.
What are the 10 adjustment points for?
Mounting a suppressor on a pistol can nudge your point of impact away from your sights. The 10 adjustment points let you index the piston in small increments to correct that shift, so your rounds land where you aim with the can installed. It is a quick fix that saves you from chasing your zero at the range.
Do I need a booster assembly to use this piston on my 10mm pistol?
If you are running a tilting-barrel semi-auto like most 10mm pistols, yes. The piston works inside a booster (Nielsen device) housing, which lets the barrel cycle properly under the added weight of the suppressor. This piston is designed for the YHM-2055 booster housing and drops into many other popular booster assemblies as well.





Reviews
There are no reviews yet.