Description
Quick detach convenience usually comes with a length penalty, and that is exactly what the Yankee Hill Machine Kurz QD Adapter was built to fix. Kurz is German for short, and this little piece of 17-4 stainless steel lives up to the name by shaving 0.675 inches off the standard Phantom QD mounting setup. If you are running a HUB-compatible suppressor with 1-3/8"-24 rear threads, this adapter lets you bring YHM's proven quick detach system to your can without stretching your rifle out any further than it needs to be.
What the Kurz QD Adapter Works With
Compatibility is the big story here. The Kurz adapter fits popular HUB-pattern suppressors including the SilencerCo Omega 300, Hybrid, Harvester .338, and Big Bore models, plus the Dead Air Nomad and RMS 2 Hopaii. Once installed, it accepts YHM's QD flash hider and muzzle brake mounts (the 3102-1MB and 4315, sold separately), so you can swap your suppressor between hosts in seconds with that satisfying click that tells you everything is locked up tight. If you already own YHM mounts from a Turbo or Resonator, this is a slick way to bring your other cans into the same ecosystem.
Built the YHM Way
Yankee Hill machines this adapter from 17-4 stainless steel and coats it in a matte black oxide finish that resists corrosion and keeps the profile low key. At right around 2 ounces, it adds minimal weight while trimming real length, which matters on a hunting rig or any build where handling comes first. Installation is simple too. Pull the existing mount hardware off your suppressor with the factory wrenches it came with, thread the Kurz adapter on, and you are ready to go. It is a small part that solves a real problem, made in the USA by a company that has been machining quality parts for decades.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Model: Kurz QD Adapter
- Manufacturer Part Number: YHM-3051
- UPC: 841812100997
- Thread Pitch: 1-3/8"-24 (HUB compatible)
- Material: 17-4 Stainless Steel
- Finish: Matte Black Oxide
- Length Reduction: 0.675 inches
- Weight: 2 oz (adapter only)
- Compatible Mounts: YHM 3102-1MB and 4315 QD Mounts
- Fits: SilencerCo Omega 300, Hybrid, Harvester .338, Big Bore, Dead Air Nomad, RMS 2 Hopaii
- Color: Black
- Made In: USA
What’s Included
- Kurz QD Adapter
Frequently Asked Questions
Which suppressors does the YHM Kurz QD Adapter fit?
It fits any suppressor with HUB-compatible 1-3/8"-24 rear mounting threads. That includes the SilencerCo Omega 300, Hybrid, Harvester .338, and Big Bore, along with the Dead Air Nomad and RMS 2 Hopaii. If your can uses the industry-standard HUB thread pattern, you should be in good shape.
Do I need anything else to use the Kurz QD Adapter?
Yes, the adapter is one half of the system. You will also need a YHM QD muzzle device on your host gun, such as the 3102-1MB muzzle brake mount or 4315 QD mount, which are sold separately. The adapter threads onto your suppressor, and the muzzle device stays on the barrel.
How much shorter does this make my setup compared to the standard Phantom QD mount?
The Kurz adapter reduces the Phantom QD mounting assembly length by 0.675 inches. It also keeps weight down, with the adapter itself coming in at right around 2 ounces thanks to its 17-4 stainless steel construction.
How do I install the YHM-3051 Kurz adapter on my suppressor?
Installation is straightforward. Remove the existing rear mount or thread insert from your suppressor using the factory wrenches that came with it, then thread the Kurz adapter into the 1-3/8"-24 rear threads. Once it is snugged up, your suppressor is ready to lock onto any compatible YHM QD muzzle device.





Reviews
There are no reviews yet.