$74.75
85 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
There is a lot to like about the HUB standard, and this little adapter from Yankee Hill Machine is a perfect example. It threads into the 1.375×24 HUB interface on your suppressor and converts the whole can to a straightforward 5/8×24 direct thread setup. That thread pitch covers most .30 caliber rifle barrels along with plenty of other big bore hosts, so if your bolt gun or precision rifle wears standard 5/8×24 muzzle threads, this gets your HUB can on it without any muzzle device swaps or proprietary hardware.
Installation is about as painless as it gets. Pull the existing mount or QD mechanism out of your suppressor, thread this mount into the HUB threads, and snug it down with a 3/4 inch open end wrench. From there the can spins straight onto your barrel like any dedicated direct thread suppressor. A lot of folks pick one of these up so they can run a single can across multiple rifles, keeping a QD mount on one host and swapping to direct thread duty on a hunting rig or precision gun where a low profile, repeatable attachment makes more sense.
YHM machines this mount from heat treated 17-4 PH stainless steel, which handles heat and hard use far better than the mild steel you'll find in bargain bin adapters. The Black Melonite QPQ finish adds surface hardness and corrosion resistance, and it matches the look of most modern suppressors. At just 1.7 ounces, it adds next to nothing on the front of your barrel, and the .45 caliber bore gives generous clearance for smaller calibers passing through.
Direct thread has real advantages: less weight, fewer parts to work loose, and consistent alignment shot after shot. If you own a HUB-compatible suppressor and a safe full of 5/8×24 threaded barrels, this is one of those inexpensive parts that makes the whole collection more useful. Keep a wrench in the range bag and you can reconfigure your can in about a minute.
It fits any suppressor built on the industry standard HUB interface, which uses 1.375×24 threads. That covers a huge range of modern cans from YHM and many other manufacturers. If your suppressor has a removable mount and lists HUB compatibility, this adapter will thread right in.
Just a standard 3/4 inch open end wrench. Remove your suppressor's existing mount or QD module, thread this mount into the HUB threads, and tighten it down with the wrench. From there the can threads directly onto any 5/8×24 barrel.
The mount has a .45 caliber bore, so it clears anything your suppressor itself is rated for up to .45. The 5/8×24 thread pitch is the common standard on .30 caliber rifle barrels, including 308 Win, 6.5 Creedmoor, and 300 Blackout hosts. Always match the setup to your suppressor's caliber rating.
Direct thread mounting is lighter, simpler, and has fewer moving parts, which many people prefer on bolt guns and precision rifles. It also gives consistent alignment and repeatable point of impact without needing a dedicated muzzle device on every barrel. QD systems are quicker for swapping between rifles, but direct thread wins on simplicity and weight.
| UPC | 841812101765 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | YHM-2189-24 |
| Color | Black |
| Length | 5.5 |
| Model | |
| Package Height | 1.3 |
| Package Width | 3.3 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.13 |
You must be logged in to post a review.
Reviews
There are no reviews yet.