$36.75
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
One of the best things about the VICTRA-12 is that it isn't stuck at one length, and this rod kit is how you unlock the shortest setup it offers. The suppressor ships from Yankee Hill Machine in its full 12-inch configuration, but with the right rods you can rebuild it at 10, 8, or 6 inches depending on how you want the gun to handle. This kit covers the 6-inch option, giving you a pair of assembly rods cut specifically for that length. Drop some baffles, swap in these rods, and you've turned a full-size can into a compact unit that comes in at about 6.4 inches overall and roughly 13.5 ounces hanging off the muzzle.
A shotgun with a foot of suppressor on the end swings differently than one wearing half that. The 6-inch setup is the pick when maneuverability and balance matter more than squeezing out every last decibel of reduction. It's a popular configuration for tighter quarters, brush hunting, or any shotgun that already carries a longer barrel. You give up some sound performance compared to the full-length assembly, with YHM listing an ear average around 141 dB in this configuration, but you gain a package that points fast and doesn't feel nose-heavy.
These rods are machined from 17-4 stainless steel at .1875 inch diameter, the same tough, corrosion-resistant material trusted throughout the platform. Their whole job is keeping the baffle stack aligned and locked together shot after shot, and they're made in the USA to YHM's specs so everything fits the way it should. Reconfiguring is a simple bench job using a 5/32 inch Allen wrench, so switching lengths before a hunt or range day takes minutes, not an afternoon. If you own a VICTRA-12 and haven't tried it short yet, this is the inexpensive piece that makes it happen.
The VICTRA-12 modular suppressor uses a pair of assembly rods to hold its baffle stack together, and the rod length determines the overall length of the can. This kit gives you the two rods needed to build the suppressor in its shortest 6-inch configuration. The suppressor ships with 12-inch rods, so shorter setups require the matching rod kit.
You'll need a 5/32 inch Allen wrench to take the suppressor apart and reassemble it. The process is a straightforward bench job: remove the original rods, set aside the baffles you're not using, install the 6-inch rods, and torque everything back down. Most owners can swap lengths in a few minutes.
Shorter means lighter and handier but a bit louder. In the 6-inch configuration the VICTRA-12 runs about 6.4 inches overall and 13.5 ounces with an ear average around 141 dB, compared to roughly 25 ounces and 135 dB at the full 12 inches. It's a solid trade if you want a faster-handling shotgun for hunting or tight spaces.
Yes. They're machined from 17-4 stainless steel, a heat-treated alloy known for high strength and corrosion resistance, and it's the same material YHM uses across the VICTRA-12 rod lineup. Swapping between lengths regularly won't wear them out under normal use.
| UPC | 841812102823 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | YHM-1206 |
| Color | Black |
| Length | 11.4000 |
| Model | |
| Package Height | 0.6 |
| Package Width | 5.1 |
| Product Type | Accessory-Silencer Accessories |
| Shipping Weight | 0.2 |
You must be logged in to post a review.
Reviews
There are no reviews yet.