Description
Yankee Hill Machine took a smarter approach to shotgun suppressor mounting, and this Remington mount for the Victra-20 is a good example of why it works so well. Instead of clamping onto the outside of the barrel or requiring gunsmith work, the YHM-1352A threads straight into the factory Rem Choke threads on your 20 gauge Remington barrel. That gives the V-20 a secure, centered attachment point using hardware your shotgun already has.
How the Victra-20 Remington Mount Works
Here is the part that trips some folks up at the counter: this mount is not a choke. It provides zero constriction to the shot load. All the pattern work happens up front, in the choke cone that sits in the end cap of the Victra-20 suppressor itself. That design means you only need one mount per shotgun, and you can swap chokes at the muzzle end of the can whenever you want to tighten or open up your pattern. It is a cleaner and more affordable system than buying a combined mount and choke unit for every setup.
Built Like the Rest of the YHM Lineup
The mount is machined from 17-4 stainless steel and wears a Melonite finish, so it shrugs off the fouling, moisture, and general abuse that shotgun gear picks up in a duck blind or turkey woods. YHM includes the V-20 jam nut with every mount, which locks everything down tight so the suppressor stays put through a long day of shooting. Like the rest of the Victra line, it is made in the USA.
Setting Up Your 20 Gauge Remington
If you run an 870, 1100, or V3 in 20 gauge with Rem Choke threads, this is the mount that pairs your gun with the Victra-20. Each YHM mount is machined for a specific manufacturer thread pattern, so double check that your barrel takes Rem Choke tubes before ordering. Once it is installed, mounting and removing the suppressor is quick, and your barrel keeps a factory-tight fit every time.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-1352A
- UPC: 841812103240
- Compatible Suppressor: YHM Victra-20 (V-20)
- Thread Compatibility: Remington (Rem Choke), 20 gauge
- Material: 17-4 Stainless Steel
- Finish: Melonite
- Function: Suppressor mount only, no choke constriction
- Shipping Weight: 0.16 lb
- Country of Origin: USA
What’s Included
- Victra-20 Remington mount assembly
- V-20 jam nut (YHM-1250)
Frequently Asked Questions
Does the Victra-20 Remington mount change my shot pattern?
No, and that is by design. The mount only secures the suppressor to your barrel and adds no constriction to the shot load. Pattern control comes from the choke cone in the front cap of the Victra-20 itself, and YHM offers different chokes you can swap up front to tighten or open your pattern.
Which Remington shotguns does the YHM-1352A fit?
It fits 20 gauge Remington barrels threaded for Rem Choke tubes, which covers popular guns like the 870, 1100, and V3 in 20 gauge. Just confirm your barrel accepts Rem Choke tubes before ordering. If your shotgun uses a different thread pattern, YHM makes mounts for Browning Invector, Mossberg, Winchester, Beretta, and Benelli systems too.
Will this mount work with my Victra-12 suppressor?
No, this one is specific to the 20 gauge Victra-20. The Victra-12 uses its own Remington mount, part number YHM-1252A. Make sure you match the mount to the suppressor you own since the two are not interchangeable.
What is the jam nut for?
The included V-20 jam nut locks the suppressor down against the mount so nothing loosens up under recoil. It keeps the can indexed and tight through extended shooting sessions. YHM includes one with every Victra mount, so you have everything needed to get attached right out of the package.





Reviews
There are no reviews yet.