Description
The Victra-20 suppressor did something a lot of us have been waiting on for years, and this mount is the piece that puts it on your gun. The YHM-1353A threads into the Invector-pattern choke threads on your 20 gauge barrel, giving the Victra-20 a rock solid attachment point without permanent modifications or a trip to a gunsmith. Screw out your choke tube, thread this in, spin the can on, and you're in business.
How the Victra-20 Invector Mount Works
Here's the part that trips people up at the counter: this mount is not a choke. YHM split those two jobs on purpose. The mount handles attachment only, so your shot column passes through without any added constriction. Pattern control comes from the choke cone up in the front cap of the Victra-20 itself, where YHM offers Improved Cylinder, Modified, and Full options. That layout means you can swap chokes without ever touching the mount, and your point of impact stays consistent. Since the Victra-20 has an offset bore, the included V-20 jam nut keeps the suppressor indexed exactly where you set it, shot after shot.
Built Like Everything Else From Yankee Hill
YHM machines these mounts from 17-4 stainless steel and gives them a Melonite finish, the same treatment that keeps barrels running in nasty weather. It only adds about 0.950 inches to your barrel length, so handling stays close to stock. Duck blind humidity, dove field dust, wet mornings in the turkey woods, this thing shrugs it all off.
Fitting the YHM-1353A to Your Shotgun
Each Victra-20 mount is cut for a specific choke thread pattern, and this one covers the Invector family found on a bunch of popular 20 gauge guns from Browning, Mossberg, and Winchester. Double check the choke system marked on your barrel or listed in your manual before ordering, since Invector and Invector Plus are different threads. If your barrel takes Invector-pattern tubes, this is the mount that gets your Victra-20 in the field.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-1353A
- UPC: 841812103257
- Compatible Suppressor: YHM Victra-20 (20 Gauge)
- Choke Thread Pattern: Browning Invector
- Material: 17-4 Stainless Steel
- Finish: Melonite, Black
- Length Added to Barrel: Approx. 0.950 in
- Function: Suppressor mount only, no choke constriction
- Shipping Weight: 0.15 lb
- Made In: USA
What’s Included
- Victra-20 Invector mount assembly
- YHM V-20 jam nut (YHM-1250)
Frequently Asked Questions
Does the Victra-20 Invector mount work as a choke?
No, and that's by design. The mount only attaches the suppressor to your barrel and adds zero constriction to the shot load. Pattern control comes from the choke cone installed in the front cap of the Victra-20 itself, with Improved Cylinder, Modified, and Full cones available from YHM.
Which shotguns does the YHM-1353A fit?
This mount is cut for the Browning Invector choke thread pattern, which shows up on a range of popular 20 gauge barrels from Browning, Mossberg, and Winchester. Just be sure your barrel is standard Invector and not Invector Plus, since those are two different thread patterns and YHM makes a separate mount for each. Check the markings on your barrel or choke tubes if you're not sure.
How do I install the Victra-20 mount?
Remove your existing choke tube and thread the mount into the barrel just like you would a choke. Then spin the Victra-20 onto the mount and use the included jam nut to lock it down. The jam nut matters here because the Victra-20 has an offset bore, and it keeps the can clocked in the right orientation while you shoot.
Will this mount fit the Victra-12 suppressor?
No, the YHM-1353A is built for the 20 gauge Victra-20. The Victra-12 uses its own line of mount assemblies sized for 12 gauge barrels and that suppressor's dimensions. Match the mount series to your can and you'll be set.





Reviews
There are no reviews yet.