0
0

YHM Victra-20 Assembly Rod Kit 4″/6″/8″ Set of 6 Stainless YHM-1315

UPC: 841812103189

$103.75

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Victra-20 ships from the factory with a pair of 10 inch rods, which is great for full sound suppression but not always what you want hanging off the end of a 20 gauge. This rod kit from Yankee Hill Machine is the answer. You get six assembly rods total, two each in 4, 6, and 8 inch lengths, letting you rebuild your Victra-20 into any of its shorter configurations. Pull baffles, swap rods, and you've got a suppressor sized for the way you shoot that day.

Why the Victra-20 Rod Kit Earns Its Spot in Your Range Bag

The whole point of a modular suppressor is flexibility, and without these rods you're stuck at one length. Dropped to its 4 inch configuration, the Victra-20 runs about 4.4 inches overall and weighs in around 12 ounces, which keeps a 20 gauge lively and quick to swing. Step up to the 6 or 8 inch setups when you want more volume knocked down but still less bulk than the full 10 inch build. For a lot of owners, the 8 inch length ends up being the sweet spot between handling and hearing comfort.

Built Like Everything Else YHM Makes

These rods are machined from 17-4 stainless steel with a natural stainless finish, made in the USA to the same standard as the suppressor they hold together. That matters, because the rods are the backbone of the whole baffle stack and take a beating with every shell. Swapping between configurations is straightforward with a 5/32 inch Allen wrench, and once you've done it a couple times it takes just a few minutes at the bench.

If you own a Victra-20, this kit is the accessory that turns one suppressor into four. Set it up long for a relaxed day breaking clays, short for tight quarters or a handier field gun, and everything in between.

Key Specifications

  • Manufacturer: Yankee Hill Machine
  • Manufacturer Part Number: YHM-1315
  • UPC: 841812103189
  • Compatibility: YHM Victra-20 modular shotgun suppressor
  • Rod Lengths: 4", 6", and 8" (two of each)
  • Quantity: 6 rods total
  • Material: 17-4 stainless steel
  • Finish: Natural stainless
  • Tool Required: 5/32" Allen wrench (not included)
  • Shipping Weight: 0.31 lb
  • Country of Origin: Made in USA

What’s Included

  • Two 4" Victra-20 assembly rods
  • Two 6" Victra-20 assembly rods
  • Two 8" Victra-20 assembly rods

Frequently Asked Questions

What does the Victra-20 rod kit let me do?

The Victra-20 suppressor comes standard with two 10 inch rods. This kit adds pairs of 4, 6, and 8 inch rods so you can remove baffles and rebuild the can at any of its shorter lengths. Shorter setups trim weight and overall length, while longer setups give you more sound reduction.

Will these rods work with the Victra-12?

The 6 and 8 inch rods can be used across the Victra platform, but YHM specifically advises against running the 4 inch rods on the Victra-12. If you own the 12 gauge model, look at the rod kits sized for that suppressor instead.

What tools do I need to change configurations on my Victra-20?

You'll need a 5/32 inch Allen wrench, which is not included with the rod kit or the suppressor. With that one tool you can pull the rods, remove or add baffles, and reassemble at your chosen length in a few minutes.

How much quieter is the Victra-20 at full length versus the 4 inch setup?

In its 4 inch configuration the Victra-20 averages around 138 dB at the ear, while the full 10 inch build brings that down to roughly 132 dB. Every baffle you add knocks the report down further, so the rod kit lets you pick your own balance between size and sound.

Additional information

UPC

841812103189

Manufacturer

Manufacturer Part Number

YHM-1315

Shipping Weight

0.31

Reviews

There are no reviews yet.

Be the first to review “YHM Victra-20 Assembly Rod Kit 4″/6″/8″ Set of 6 Stainless YHM-1315”