Description
Got a Harris-style bipod and a rail-equipped rifle that won't play nice together? The Yankee Hill Machine YHM-638 bridges that gap. It clamps onto any Picatinny rail and gives you a standard sling-swivel stud, which is exactly what Harris and most swivel-stud bipods need to lock on. It's a small piece of hardware that solves a common headache, and it does it without any fuss.
What Makes the YHM-638 Worth Bolting On
YHM machines this adapter from 6061-T6 aircraft-grade aluminum and finishes it with a hardcoat matte black anodize done to military specs or better. That combination keeps the weight down to right around 2.1 ounces while shrugging off the knocks and weather that come with real field use. Folks who run these tend to point out the quality of the milling and how tightly the unit locks onto the rail once the screws are snugged up.
Getting the YHM-638 Set Up
Installation is about as simple as it gets. The pinch-style clamp slides onto your rail and cinches down with two hex screws using a 7/64" Allen wrench. Once tight, it stays put, and users regularly describe the fit as solid as a rock even under recoil at the range or in matches. One thing worth knowing before you order: the Allen wrench isn't included, so grab one if you don't already have it in your kit.
Where the YHM-638 Shines
This adapter is popular with AR builders finishing off a free-float rail, precision shooters running a bipod for PRS-style work, and hunters who want to add a bipod to a rail-equipped stock. Because it works on any true mil-spec Picatinny rail, it's an easy way to move one bipod between multiple rifles. If your rifle has the rail and your bipod has the swivel stud, this is the honest little middleman that ties the two together.
Key Specifications
- Manufacturer: Yankee Hill Machine
- Manufacturer Part Number: YHM-638
- UPC: 816701014389
- Material: 6061-T6 Aircraft-Grade Aluminum
- Finish: Hardcoat Anodized Matte Black (Mil-Spec or better)
- Color: Black
- Mounting Interface: Picatinny Rail
- Bipod Compatibility: Harris-Style / Swivel-Stud Bipods
- Weight: 2.144 oz
- Installation Tool: 7/64" Allen Wrench (not included)
What’s Included
- Yankee Hill Machine YHM-638 bipod adapter
- Mounting hardware (clamp screws)
Frequently Asked Questions
Will a Harris bipod fit the YHM-638 adapter?
Yes. The YHM-638 provides a standard sling-swivel stud, which is exactly the interface Harris bipods clamp onto. It also works with most other swivel-stud style bipods, including Caldwell models.
Does the YHM-638 come with the Allen wrench needed to install it?
No, the 7/64" Allen wrench is not included in the package. It's a common size, so if you have a basic gun tool kit you likely already have one. Pick one up ahead of time if you don't.
Will the YHM-638 fit any Picatinny rail?
It's designed to mount to any true mil-spec Picatinny rail, whether that's a receiver top, a free-float handguard, or a rail section on a stock. Because it's machined to tight tolerances as a one-piece clamp, a rail that's out of spec can make it harder to snug down. On a proper mil-spec rail it locks up tight and secure.
Can I move the YHM-638 between different rifles?
Absolutely. Since it clamps on and off with a couple of hex screws, it's easy to swap one bipod between multiple rail-equipped rifles. Plenty of owners keep one on each gun so their bipod is always ready to go.




Reviews
There are no reviews yet.