0
0

XS Sights GUNSMITH-Series Inline Sight Pusher Kit for Glock

UPC: 647533000024

$205.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've ever fought a stubborn Glock rear sight with a punch and a hammer, the XS Sights GUNSMITH-Series Inline Sight Pusher Kit is the upgrade you've been wanting. Built for professional gunsmiths and serious DIYers who work on more than one pistol, this kit uses an inline design that applies force low in the dovetail and drives the sight in the exact direction it needs to go. That's the same principle bench gunsmiths have relied on for decades with punches, just with far more control and roughly half the effort. It handles the full range of Glock work, including optic-height and suppressor-height sights, and it fits every OEM Glock slide along with many popular aftermarket options like Zev, Lone Wolf, Grey Ghost, and Polymer 80 style slides.

What Sets the GUNSMITH-Series Pusher Apart

The magnets are the detail people notice first. The bolt head holds the multi-function T-handle so it won't tumble off mid-turn, and the magnetic hex bit grips the Glock front sight screw so you're not chasing a tiny fastener across the bench. The drive bolt is black oxide 1144 stress-proof steel at 3.75 inches, paired with a 4.25-inch multi-function handle. You can spin it as a T-handle for fast travel, then swing it out as a long lever when the sight passes through the tight center of the dovetail and pressure builds. A non-marring brass drive plate does the pushing so your slide finish stays clean.

Dialing In Windage With the GUNSMITH-Series Kit

The open-top design lets you eyeball centering quickly, and a built-in 1/16-inch measuring scale on the tool and bit gives you real numbers to work with. Read the hash mark against the etched line, flip the slide, and confirm both sides match for a mechanically centered start. From there it's a quick trip to the range for fine windage, since one-and-a-half bolt rotations moves the sight about 1/16 of an inch. The locking wedge clamps the slide in seconds, so setup is fast whether you're doing one gun or a dozen. It works great with XS R3D night sights and installs most competitor sights too.

Key Specifications

  • Manufacturer: XS Sights
  • Manufacturer Part Number: GSSIRSTGL1
  • UPC: 647533000024
  • Model: GUNSMITH-Series Inline Sight Pusher Kit
  • Fitment: All OEM Glock slides plus many aftermarket slides
  • Design: Inline rear sight pusher, force applied low in dovetail
  • Install Force Reduction: Up to 50% vs standard tools
  • Drive Bolt: Black oxide 1144 stress-proof steel, 3.75", 5/16"-24
  • Handle: 4.25" multi-function T-handle/lever
  • Drive Plate: Non-marring brass
  • Measuring Scale: Built-in 1/16" centering scale
  • Magnetic Retention: Bolt head and hex bit
  • Sight Compatibility: Optic-height and suppressor-height sights, XS R3D and most competitor sights

What’s Included

  • Locking wedge
  • Sight pusher base with brass drive plate
  • Multi-function T-handle / steel magnetic front sight tool
  • Red threadlocker
  • Instruction insert

Frequently Asked Questions

Will the GUNSMITH-Series kit work on my aftermarket Glock-style slide?

It fits every OEM Glock slide and has been tested with many popular aftermarket slides including Zev, Lone Wolf, Grey Ghost, and Polymer 80 style slides. Keep in mind non-OEM slides can have tighter dovetail tolerances, so you may feel more resistance than you would on a factory slide. For the smoothest results, pairing it with XS R3D sights takes advantage of their easy-press dovetail design.

Can I use this Glock sight pusher to adjust windage with an optic already mounted?

Yes. The GUNSMITH-Series is designed to install sights or make windage adjustments on slides that have an optic mounted, as long as the optic and factory plate cover are in place first. The built-in 1/16-inch scale lets you track exactly how far you move the rear sight, and roughly one-and-a-half bolt rotations equals 1/16 of an inch of travel.

Does the kit come with a front sight tool, or do I need to buy one separately?

The kit includes a multi-function T-handle that doubles as a steel magnetic front sight tool, so you can handle both front and rear sight work with one setup. The magnetic hex bit holds the Glock front sight screw in place for a drop-free install. Red threadlocker and an instruction insert are also included in the box.

What makes the inline design easier than a standard sight pusher?

The inline layout applies force low in the dovetail and precisely in the direction the sight needs to travel, which is the same approach gunsmiths use when driving sights with a punch. That geometry reduces installation force by up to 50 percent compared to standard tools. Less effort means better control and a cleaner install, especially on tight dovetails.

Additional information

UPC

647533000024

Manufacturer

Manufacturer Part Number

GSSIRSTGL1

Reviews

There are no reviews yet.

Be the first to review “XS Sights GUNSMITH-Series Inline Sight Pusher Kit for Glock”