Description
Turkey hunting asks a lot of a shotgun. You carry it for miles, set it across your knee for an hour without moving, then need it to run perfectly on one heavy load when a longbeard finally commits. The Weatherby Element 2 Turkey was built around exactly that job. The 22 inch barrel keeps the gun short and quick to swing in tight timber, the 3 inch chamber handles serious turkey loads, and the whole package weighs in at a very carryable 6.7 pounds with an overall length of 43.25 inches.
Inertia-Driven Reliability in the Element 2 Turkey
Under the Bottomland dip is Weatherby's inertia recoil system, the same style of action that has earned a reputation for staying clean and cycling reliably in wet, muddy, real-world hunting conditions. Since there are no gas ports dumping fouling into the works, the gun stays cleaner between range sessions and hunts. The Element 2 also gets oversized controls, including a bigger bolt release, charging handle, and safety, so you can run the gun with cold fingers or gloves on without fumbling. The receiver comes drilled and tapped, which makes adding a red dot for tight turkey patterns a simple weekend project.
Set Up for the Spring Woods
Mossy Oak Original Bottomland covers the synthetic stock, receiver, and barrel, a pattern turkey hunters have trusted for decades because it flat out vanishes against tree bark. A fiber optic front sight rides the vented rib for a bright aiming point in low first-light conditions, and the 2+1 capacity keeps things simple in the blind. Choke tubes are included so you can tighten things up with the extended full for long-range patterning or open it up if you pull this gun out for other duties. Sling studs come standard, because nobody wants to carry a turkey gun in hand for three ridges.
For hunters who want a dedicated gobbler gun that is light, reliable, and ready to hunt out of the box, this one checks the boxes without much fuss.
Key Specifications
- Manufacturer: Weatherby
- Manufacturer Part Number: EB21222PGM
- UPC: 747115462933
- Gauge: 12 Gauge
- Action: Semi-Auto (Inertia Recoil System)
- Barrel Length: 22"
- Chamber: 3"
- Capacity: 2+1
- Overall Length: 43.25"
- Weight: 6.7 lbs
- Finish: Mossy Oak Original Bottomland Camo
- Stock: Synthetic
- Front Sight: Fiber Optic
- Length of Pull: 14.625"
- Chokes Included: Extended Full
What’s Included
- Weatherby Element 2 Turkey semi-auto shotgun
- Extended full choke tube
- Owner's manual
Frequently Asked Questions
Can I mount a red dot on the Weatherby Element 2 Turkey?
Yes. Unlike the original Element Turkey, the Element 2 comes with a receiver that is drilled and tapped from the factory. That means you can add a base and the micro red dot of your choice without a trip to the gunsmith, which is a big plus for hunters running tight turkey chokes at longer distances.
Does the Element 2 Turkey handle 3.5 inch shells?
No, this model has a 3 inch chamber, so it runs 2.75 and 3 inch shells. The good news is that modern TSS and premium lead turkey loads in 3 inch have made 3.5 inch shells largely unnecessary for most hunters, and your shoulder will thank you at the patterning board.
How does the inertia action benefit a turkey gun?
Inertia-driven actions do not vent gas and fouling into the receiver the way gas guns do, so they stay cleaner and keep cycling in mud, rain, and dust. They also tend to be lighter, which matters when you are covering ground chasing gobblers. The trade-off is slightly more felt recoil than a gas gun, but at 6.7 pounds this one is still comfortable with turkey loads.
Is the 22 inch barrel too short for good turkey patterns?
Not at all. Pattern density comes from your choke and load combination, not barrel length, and turkey guns run short barrels on purpose for maneuverability in blinds and tight cover. Spend a little time at the patterning board with the included extended full choke and a quality turkey load, and this setup will produce dense, effective patterns.




Reviews
There are no reviews yet.