$26.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you've been running your Winchester 1300 or SXP pump bare on top and want to add a red dot or scope, this EGW rail is the clean way to get it done. It's a one-piece Picatinny base machined from domestic 6061-T6 extruded aluminum and finished in hard-coat matte black anodizing, so it holds up to weather, recoil, and years of hard use in the field. With cross slots running the length of the rail, you get real flexibility in where you position your rings and optic for proper eye relief.
This is a flat 0 MOA base, meaning there's no built-in elevation cant. For a shotgun used inside typical slug and turkey distances, that's exactly what you want since it keeps your optic's adjustment range centered. The rail follows the MIL-STD 1913 Picatinny spec, so it plays nicely with standard Picatinny or Weaver rings, giving you plenty of choices when you build out the setup. At roughly 2 ounces, it adds mounting capability without weighing down the gun.
The mount is cut to fit the Winchester 1300, the SXP (Super X Pump), and the FN SLP, though the SLP needs to be drilled for #8 screws. It ships ambidextrous thanks to a bevel machined on both sides, so lefties and righties are covered equally. EGW includes the #6-48 x 1/4 screws and a T-10 bit, and they recommend torquing to 20 in/lbs with a drop of blue Loctite to lock everything down. Tighten the rear screw last for the best fit.
Made in the USA, this is the kind of part that tends to outlast the gun it's bolted to. Folks who've installed it note a precise fit and the extra rail length that opens up mounting positions. If you want a dependable foundation for your pump shotgun's optic, this one earns its keep.
This rail is machined to fit the Winchester 1300 and the Winchester SXP (Super X Pump). It will also fit the FN SLP, but that model must be drilled for #8 screws first. Note that the Winchester SX4 and SX3 require 8-36 x 3/8 screws that are not included with this mount.
0 MOA means the rail is flat with no built-in forward cant, so it sits level with your bore. That keeps your optic's elevation adjustment centered, which is ideal for the ranges a pump shotgun typically shoots. EGW recommends 0 MOA for shooting out to about 500 yards.
The rail is cut to the MIL-STD 1913 Picatinny standard, so it accepts standard Picatinny or Weaver scope rings. Rings are not included, so you'll want to grab a set sized to your optic's tube diameter. The full-length cross slots give you plenty of room to position rings for proper eye relief.
Yes, the mount ships with #6-48 x 1/4 screws and a T-10 bit. EGW recommends torquing the screws to 20 in/lbs and adding a drop of blue Loctite to keep everything secure under recoil. Tightening the rear screw last helps the rail seat properly on the receiver.
| UPC | 841370105939 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 42500 |
| Color | Black |
| Length | 8.2000 |
| Style | Picatinny Rail |
You must be logged in to post a review.
Reviews
There are no reviews yet.