$28.16
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
If you're loading long, slippery 7mm bullets, the standard seating stem that ships with your Wilson die can contact the bullet too close to the tip, which is where runout and inconsistent length creep in. This VLD Drift stem solves that. It's reamed with a steeper angle so it grips lower on the bullet profile, holding the projectile in better alignment as it seats. The result is more consistent cartridge overall length and less bullet runout on the bullets that need it most.
This stem is built for .284 / 7mm caliber projectiles with a VLD-style nose, and it handles Secant, Hybrid, and Tangent ogive bullets alike. Think Berger VLDs and Hybrids, Hornady ELD-M, Sierra MatchKings, and similar long-nose designs. Because it contacts the bullet further down from the meplat, you avoid the tip bottoming out in the stem cavity, a common cause of seating depth variance that handloaders chasing tight groups fuss over. Reloaders who run these bullets routinely call the VLD stem a must-have rather than a nice-to-have.
This is a direct replacement for the standard stem supplied with L.E. Wilson Chamber Type bullet seating dies. It drops into your existing seater, so there's no new die to buy and no setup headache. If you run an arbor press with your Wilson seater, this pairing gives you that nice tactile feel as the bullet seats, which makes culling odd rounds and doing seating depth work at the range a whole lot easier.
L.E. Wilson has been machining precision reloading tools in the USA for over 80 years, and this stem carries that same reputation for tight tolerances. For anyone building precision 7mm loads with modern high-BC bullets, it's a small part that makes a real difference on the target.
It's designed for .284 / 7mm VLD-style projectiles, and it works across Secant, Hybrid, and Tangent ogive profiles. That covers popular long-nose match bullets like Berger VLDs and Hybrids, Hornady ELD-M, and Sierra MatchKings. The steeper reaming lets it grip lower on the bullet so the tip doesn't bottom out in the stem.
Yes. The BSD-V70 is a direct replacement for the standard stem that comes in L.E. Wilson Chamber Type bullet seating dies. It drops right in, so you don't need a new die, just swap the stem and keep loading.
The standard stem contacts long VLD and hybrid bullets up near the tip, which can cause runout and inconsistent seating depth. The VLD stem grips lower on the ogive for better alignment and more consistent overall length. If you're loading high-BC match bullets and chasing accuracy, it's worth the swap.
It does. By holding the bullet lower on the profile, it keeps the projectile in better alignment as it seats, which reduces runout and tightens up cartridge length consistency. Paired with a Wilson seater and an arbor press, it gives you good feel for culling odd rounds too.
| UPC | 815145029041 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | BSD-V70 |
| Caliber/Gauge | .284 Caliber |
| Shipping Weight | 0.1 |
You must be logged in to post a review.
Reviews
There are no reviews yet.