$31.99
34 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Wilson Combat 455B is the heart of a good trigger job. If your 1911 or Commander came with a gritty, heavy factory hammer, swapping in this Value Line piece is one of the cheapest ways to wake up the trigger and make the gun feel like it cost a lot more than it did. Wilson built this one to look and perform like their high-dollar custom parts without the high-dollar sticker.
What makes it work is the geometry. Wilson relocated the strut pin hole specifically to help you get a lighter pull, and the hammer face is cut to mate up cleanly with a matching sear for a crisp, predictable break. The body is narrowed for proper slide-to-hammer clearance and skeletonized to cut down lock time, which is the tiny delay between the hammer falling and the round firing. Quicker lock time means less chance of your sight picture wandering before the shot breaks. It's machined from quality steel and finished in a deep blue that matches a traditional carbon-steel pistol nicely.
This hammer is made using the MIM (metal injection molding) process, which is how Wilson keeps the price down while holding tight tolerances. Don't let the value label fool you. Plenty of builders run these in everything from Rock Island GI guns and Springfield Mil-Specs to Para Ordnance and Colt frames, and the common thread is how often it drops in clean. Shooters regularly report factory pulls in the 7 to 8 pound range coming down into the low-to-mid 4 pound zone once paired with the right sear and springs.
It's a great fit for the home gunsmith building or refreshing a 1911, anyone chasing a better trigger on a budget, or a builder who wants matching custom cosmetics across a parts package. For the best results, Wilson recommends pairing it with the #314C Value Line Sear so the engagement surfaces are designed to work together. Keep in mind that small 1911 parts can require minor fitting, so a little fit-and-check work is normal and is best handled by someone comfortable with trigger geometry. It ships in Wilson Combat factory packaging.
A lot of builders report it dropping right in across a wide range of frames, including Rock Island, Springfield, Colt, and Para Ordnance, especially when paired with the matching Value Line sear. That said, Wilson notes that small 1911 parts may require minor fitting. It's smart to fit-and-check the engagement and have a qualified gunsmith handle the work if you're not comfortable with trigger geometry.
Wilson recommends pairing it with the #314C Value Line Sear for the best results. The two are designed so the engagement surfaces work together, which is what gives you that clean, crisp break. Buyers frequently run the hammer and sear as a set and report excellent results.
Yes. MIM (metal injection molding) is how Wilson keeps the price down while holding tight tolerances, and these parts are widely regarded as easily equal to quality OEM parts. They're strong, look sharp, and are built to last the life of the gun for most shooters. The value label is about cost, not corner-cutting.
Results vary by gun and what other parts you use, but it's common to see heavy factory pulls in the 7 to 8 pound range drop into the low-to-mid 4 pound range with the right sear and springs. The relocated strut pin geometry is built to help you get there. Just remember a trigger should always be tuned to break safely, not just light.
No. This hammer is designed for 1911 and Commander-style pistols only. It will not fit a Beretta 92/90-series or other non-1911 platforms, so don't try to force it into a different design.
| UPC | 874218002220 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 455B |
| Color | Blue |
| Model | |
| Product Type | Hammer |
You must be logged in to post a review.
Reviews
There are no reviews yet.