$84.48
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The L.E. Wilson 6.5 PRC Bushing Neck Sizing Die is built for handloaders who care about consistency and want real control over neck tension. Instead of relying on a one-size-fits-all expander, this die uses interchangeable bushings to size the outside of the case neck, which keeps necks concentric and takes the guesswork out of bullet grip. Drop in a tighter or looser bushing and you can fine-tune how hard your brass holds a bullet, lot after lot.
This is a hand die, so it runs on an arbor press or with a mallet rather than a standard threaded press. It sizes the neck down to about 3/16 inch from the case mouth, leaving a short section at the base of the neck untouched. A lot of precision reloaders prefer that approach because it helps the case self-center in the chamber and keeps the brass from being overworked every cycle. The die includes a decapping rod for knocking out spent primers as you go.
Skipping the expander ball is the big deal here. Pulling an expander back through the neck can drag runout into your cases, and over time that stretching shortens brass life. Sizing from the outside with a bushing sidesteps all of that, so you get straighter necks, more uniform tension, and brass that lasts through more firings. For a magnum like the 6.5 PRC that burns a fair amount of powder, getting more loadings out of quality brass adds up fast.
Bushings are sold separately, which lets you match the exact tension your load likes. The die accepts both Wilson and Redding neck bushings, so you've got plenty of sizing options to pick from. To find your bushing size, measure the outside neck diameter of a loaded round and subtract the tension you want. It's also worth pairing the die with a Wilson Neck Die Decapping Base for clean, repeatable depriming. Machined from hardened stainless steel, this die is built to hold its dimensions through years of bench time.
Yes. This is a hand die, so it runs on an arbor press or with a mallet rather than a conventional threaded 7/8 press. An arbor press gives you the best feel and most consistent results when sizing.
No, bushings are sold separately so you can match the exact neck tension your load calls for. The die accepts both Wilson and Redding neck bushings. To find your size, measure the outside neck diameter of a loaded round and subtract the amount of tension you want.
A bushing die sizes the outside of the case neck and does away with the conventional expander ball. That improves neck concentricity and extends brass life, since the neck isn't being stretched and dragged back on every cycle. It also lets you change bullet grip just by swapping bushings.
Yes, the die includes a decapping rod to remove spent primers as you size. Many reloaders pair it with the L.E. Wilson Neck Die Decapping Base, sold separately, for cleaner and more repeatable depriming.
| UPC | 815145026828 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SND-65PRC |
| Shipping Weight | 0.5 |
You must be logged in to post a review.
Reviews
There are no reviews yet.