$11.99
368 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Anybody who has run an AR hard knows the annoyance of a trigger or hammer pin starting to creep out of the receiver. It usually happens at the worst time, and once those holes start to wear you're chasing a bigger headache. This Wilson Combat set swaps out your standard .154" pins for hardened locking pins that stay put, so your fire control group keeps working the way it should even after long strings of fire.
Standard trigger and hammer pins rely on spring tension to stay seated, and that isn't always enough on high-round-count guns or lighter drop-in triggers. These pins use retaining screws to lock into place from both sides, which stops them from rotating or walking out under recoil and vibration. The result is a fire control group that stays consistent and holes in your lower that don't get chewed into an oblong mess over time. It's a popular, inexpensive fix that punches way above its price for tactical and hard-use rifles.
This set is built for standard USGI-style AR lowers that use .154" diameter trigger pins, and that covers a huge range of guns regardless of caliber. It works across AR-15 and AR-10 platforms chambered in everything from .223 Rem and 5.56 to .300 Blackout, .308 Win, and 7.62. Installation is a straightforward job at the bench with basic tools. You slide the pins into place like the originals, then snug the side screws down with the hex key. Most folks like to add a dab of blue thread locker on those screws so nothing backs out, especially on a heavy-recoiling setup.
Wilson Combat has a long reputation for getting the small stuff right, and these pins are a good example. They're machined from hardened steel, finished in a subdued black, and made in the USA. If you're pairing them with a drop-in trigger like a Timney or building a rifle that's going to see real use, this is the kind of quiet upgrade you set and forget.
It fits any standard USGI-style AR lower that uses .154" diameter trigger and hammer pins, which is the common spec for most builds. That includes AR-15 and AR-10 platforms in calibers like 5.56, .300 Blackout, .308, and 7.62. If your lower takes standard GI pins, these will drop right in.
Yes, they're a great match for drop-in triggers like Timney, CMC, and similar cassette-style units that can be prone to pin walk. The screw-locked design holds everything tight and keeps the trigger group aligned during high round counts. A lot of builders consider anti-walk pins near-mandatory when running a drop-in trigger.
It's a straightforward bench job that most people finish in a few minutes with basic tools. You push out the factory pins, slide these in, then tighten the retaining screws with the included hex key. Adding a bit of blue thread locker on the screws is a smart move so they don't back out under recoil.
Anti-walk pins are designed to keep the trigger and hammer pins from sliding out sideways during firing, which is the most common issue. Anti-rotation designs go a step further and also stop the pins from spinning, which reduces uneven wear. This Wilson Combat set locks the pins down with retaining screws to prevent both walking and rotation in the receiver.
| UPC | 810025500573 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | TR-AWP-B |
| Color | Black |
| Length | 5.5 |
| Model | |
| Package Height | 1.2 |
| Package Width | 3.2 |
| Product Type | Trigger Pins |
| Shipping Weight | 0.05 |
You must be logged in to post a review.
Reviews
There are no reviews yet.