L.E. Wilson Decapping Base Only .475 – Fits .308 Family (PBB-475)

Description

If you like to deprime your brass before anything else happens at the bench, the L.E. Wilson Decapping Base Only .475 is the piece that makes that possible. This is the base portion of Wilson's punch-and-base decapping system, sized to cradle case heads that measure right around .473 to .475 inches. It cups the case securely and leaves a hollow reservoir underneath where the old primers drop away, so you can knock out primers with a few taps instead of running every case through a die and press.

Where the .475 Decapping Base Fits

This particular size is built around the .308 Winchester cartridge family, which covers a healthy spread of popular rounds including .243 Winchester, .260 Remington, 7mm-08 Remington, .338 Federal, and .358 Winchester. All of those share a similar case head diameter, so one base handles the whole group. Wilson's rule of thumb is simple: measure your case head diameter and match it to the base size. The decapping punches are sold separately and are caliber specific, with the 30 caliber punch covering everything 30 caliber and up.

Why Reloaders Reach for the Wilson Punch and Base System

Plenty of precision handloaders prefer to pull primers as a standalone operation before sizing, and that is exactly what this tool is made for. It also shines on range brass and once-fired military cases, since it muscles out crimped-in primers that can fight a standard decapping pin. Doing it this way means you can deprime dirty brass first, then run it through the tumbler or ultrasonic cleaner with the primer pockets open so they come out spotless.

The base is case hardened for wear resistance, so it holds up to repeated hammering over the long haul. Like the rest of the Wilson lineup, it is made in the U.S.A. and built to the kind of tolerances benchrest crowd has trusted for years. Pair it with the correct punch for your caliber and you have a straightforward, dependable way to handle depriming away from your press.