$1,230.95
1 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Wilson Combat spent years running competitor suppressors through the wringer before building their own, and the Whisper Ti is what came out of that testing. This is a 7.62 rated can machined entirely from billet titanium at their shop in Berryville, Arkansas, and the material choice pays off in the hand. You get a suppressor that shrugs off heat and corrosion while weighing far less than comparable steel cans, which matters a lot more than you might think after a full day of carrying a rifle through the timber.
The oversized 1-7/8 inch main tube gives propellant gases more room to expand, which is a big part of how this can suppresses so well for its size. It also happens to sit close to the diameter of most low profile rifle handguards, so it looks like it belongs on the gun instead of hanging off the end like an afterthought. The baffle stack is welded through and through, so there is nothing inside to shake loose or shift under hard use, and Wilson Combat's testing showed no meaningful zero shift when mounting and dismounting. Back pressure is kept low too, which keeps semi autos running cleaner and cuts down on gas in your face.
This version ships set up for 5/8×24 threads with a Melonite treated Rapid-Thread muzzle brake included in the box. Leave the brake on your rifle and the can spins on and off in seconds, so swapping between a suppressed hunting rig and a bare muzzle range gun takes no real effort. Wilson Combat recommends a barrel diameter of .740 inch behind the threads for a proper fit.
The Black Armor-Tuff coating over the titanium body is heat resistant and holds up to weather, brush, and general abuse without complaint. Between the compact footprint, the light weight, and the quick mounting system, this is the kind of can you leave on the rifle and forget about. It just works, hunt after hunt and match after match.
Yes, the Whisper platform was designed with multi-caliber use in mind, so running 5.56, 6.5, or 6.8 through the 7.62 rated version is fine. Bore diameter is sized for .30 caliber projectiles, so suppression on smaller rounds will be slightly less than a dedicated can, but the difference is modest and the versatility is worth it for most folks running multiple rifles.
Wilson Combat's testing showed no significant zero shift or change to barrel harmonics with the Whisper mounted. The Rapid-Thread system indexes consistently on the included muzzle brake, so the can returns to the same position each time. Most owners find they can remove and remount it between range trips without chasing their zero.
The suppressor ships with a Melonite treated Rapid-Thread muzzle brake in 5/8×24, which is the standard thread pitch for most .30 caliber and 6.5 rifle barrels. Wilson Combat recommends a barrel outside diameter of .740 inch behind the threads so the brake shoulders up properly. If your barrel is threaded 5/8×24 with adequate shoulder, you are good to go.
Titanium gets you steel-like strength at a fraction of the weight, which is why the Whisper comes in at just 17.8 ounces despite its full size 1-7/8 inch tube. It also cools quickly, resists heat erosion, and will not corrode, so it holds up to wet hunts and long strings of fire. Less weight on the muzzle also means better handling and less fatigue on longer carries.
| UPC | 810025505585 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | SPWHISPER762BLK24 |
| ATF Type | Silencer |
| Caliber/Gauge | 7.62MM |
| Length | 8.2 |
| Package Height | 2.2 |
| Package Width | 3.5 |
| Product Type | NFA – Silencer |
| Shipping Weight | 1.0 |
| Thread Pattern | 5/8"x24 |
You must be logged in to post a review.
Reviews
There are no reviews yet.