0
0

Wilson Combat Silent Bandit 6.8mm Suppressor .277 Cal 5/8×24 HUB

UPC: 810129409093

$1,199.95

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Wilson Combat named this can after Bill Wilson's dog Bandit, and the idea carries through: quiet, dependable, and always ready to work. The Silent Bandit in 6.8mm is built for .277 caliber rifles, so it pairs up naturally with 6.8 SPC carbines, .270 bolt guns, and lightweight hunting rigs where every ounce matters. The whole can is 3D printed titanium, from the outer body to the baffle stack, which keeps weight down without giving up strength where the heat and pressure live.

What the Silent Bandit Does Differently

Wilson Combat rates the Silent Bandit at an average of 31 dB of sound reduction, and it gets there with a gas management design that controls flow instead of just trapping it. That means lower backpressure, less gas blowing back at your face on semi-autos, and a cleaner-running rifle over a long range day. The 1.75 inch outer diameter keeps the profile slim enough that it won't block your sights or turn your rifle nose-heavy, and the tube wears a high-temp version of Wilson's Armor-Tuff finish that shrugs off corrosion and abrasion in rough field conditions.

Mounting and Maintenance Made Simple

This version ships set up for 5/8×24 threaded muzzles, and the mount itself uses the industry-standard 1-3/8×24 HUB pattern, so you can swap in quick-detach adapters or other HUB accessories down the road instead of being stuck with one system. It also plays nice with Wilson Combat's QUELL K-Mount interface if you already run one of their cans. The H13 steel mount and end cap wear a black nitride finish and thread off by hand tools for full access to the baffle stack, so cleaning this suppressor is a job you can do at the bench instead of shipping it back to the factory.

Key Specifications

  • Manufacturer: Wilson Combat
  • Manufacturer Part Number: SPSB686BLK
  • UPC: 810129409093
  • Caliber: 6.8mm (.277 caliber)
  • Thread Pattern: 5/8"x24
  • Mount Type: HUB (1-3/8×24 UN-2A)
  • Body Material: 3D printed titanium
  • Mount/End Cap Material: H13 steel, black nitride finish
  • Outer Diameter: 1.75 in
  • Average Sound Reduction: 31 dB
  • Finish: High-temp Armor-Tuff (body), Black Nitride (steel parts)
  • QUELL K-Mount Compatible: Yes
  • User Serviceable: Yes, removable mount and end cap

What’s Included

  • Silent Bandit 6.8mm suppressor
  • HUB direct thread mount, 5/8×24
  • Threaded end cap (installed)

Frequently Asked Questions

What cartridges will the Silent Bandit 6.8mm handle?

This version is built around a .277 caliber bore, so it covers cartridges like 6.8 SPC, .270 Winchester, and 6.8 Western. Like most dedicated-bore cans, it will also suppress smaller diameter rounds such as 6.5mm and .223/5.56 with the right mount, though a tighter bore-matched can will squeeze out a bit more suppression on those. If your main rifles are .30 caliber, look at the 7.62mm version instead.

Can I take the Wilson Combat Silent Bandit apart for cleaning?

Yes. Both the H13 steel HUB mount and the end cap thread off via 1-3/8×24 threads, giving you full access to the titanium baffle stack. That makes routine cleaning and maintenance a simple at-home job rather than a trip back to the manufacturer.

Does the Silent Bandit work with other mounting systems?

It uses the industry-standard 1-3/8×24 HUB pattern, so you can run it with a wide range of aftermarket quick-detach mounts and adapters instead of being tied to one proprietary system. It also integrates with Wilson Combat's QUELL K-Mount interface, so if you already have QUELL muzzle devices on your rifles, this can will drop right onto them.

How much noise reduction does the Silent Bandit actually provide?

Wilson Combat rates it at an average of 31 dB of sound reduction, which takes the sharp crack of a centerfire rifle down to a far more comfortable level. Just as important, the gas management design keeps backpressure low, so semi-auto rifles run cleaner with less gas blowback at the shooter.

Additional information

UPC

810129409093

Manufacturer

Manufacturer Part Number

SPSB686BLK

Caliber/Gauge

6.8mm

Thread Pattern

5/8"x24

Reviews

There are no reviews yet.

Be the first to review “Wilson Combat Silent Bandit 6.8mm Suppressor .277 Cal 5/8×24 HUB”