$30.95
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Wilson Combat 34 Extended Ejector is one of those small parts that punches above its weight when it comes to keeping a 1911 running. The job of the ejector is simple but critical: kick the spent case out of the gun cleanly so the next round can chamber. An extended ejector reaches a little further into the path of the case, knocking it out earlier in the slide's rearward travel. That earlier contact is what helps cut down on stovepipes and erratic ejection, especially when you're feeding the gun full-power defensive ammo.
This particular ejector is fully machined from 4130 bar stock and heat treated, which is exactly what you want in a part that takes a beating every single round. The blued finish keeps it looking right at home in a traditional 1911 and adds a bit of corrosion protection. It's sized specifically for full-size .45 ACP Government-pattern pistols. Worth noting: .45 ACP and 9mm/.38 Super ejectors are not interchangeable, so if you're running a .45, this is the one you want.
Who's this for? Anyone building or refreshing a full-size 1911 in .45 ACP, or a shooter chasing more consistent brass ejection. It's a popular upgrade for both defensive carry guns and range builds. Keep in mind that while Wilson designs these to be close to drop-in, the 1911 platform varies enough between manufacturers that some hand fitting is usually part of the deal. The front leg typically needs a notch filed for the cross pin, and you'll want to verify it clears the magazine and ejects live rounds without hanging on the port.
Because fitting an ejector involves pinning, filing, and checking clearances, most folks have a gunsmith handle the install unless they've got the tools and experience to do it right. Done correctly, it's the kind of upgrade you do once and forget about for years.
An extended ejector reaches further into the path of the spent case and makes contact earlier in the slide's rearward travel. That earlier, more positive contact helps throw brass clear of the gun and cuts down on stovepipe jams. It's a marginal but real reliability gain, especially noticeable with full-power ammo and on guns prone to inconsistent ejection.
Wilson designs these to come close to drop-in, but the 1911 platform varies enough between makers that some hand fitting is usually needed. Typically you'll file a notch in the front leg for the cross pin and confirm the ejector clears the magazine and lets live rounds eject without hanging on the port. Most people have a gunsmith handle the install unless they've got the tools and know-how.
No, this is specifically a .45 ACP ejector. The geometry for .45 ACP and 9mm/.38 Super ejectors is different and they're not interchangeable. Make sure you're matching the ejector to your gun's chambering before you order.
The main tradeoff is that a too-long or poorly fitted extended ejector can make it harder to clear a live, unfired round through the ejection port. A properly fitted ejector on a gun with a lowered ejection port shouldn't have that issue, since there's plenty of length to tune it during install. That's another reason careful fitting matters.
It's fully machined from 4130 bar stock and heat treated, which is exactly the kind of material and treatment you want in a part that absorbs impact every single shot. The blued finish adds a measure of corrosion resistance and matches a traditional 1911. Fit it right and it's a one-and-done upgrade that should last for years of regular shooting.
| UPC | 874218001131 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 34 |
| Caliber/Gauge | .45 Caliber |
| Model | |
| Product Type | Ejector |
You must be logged in to post a review.
Reviews
There are no reviews yet.