$27.95
Out of stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Fitting a custom barrel to a 1911 comes down to timing, and the barrel link is one of the small parts that makes or breaks that lockup. This kit from Wilson Combat gives you five links in one shot, machined from 416 stainless bar stock and hardened for strength that holds up round after round. Instead of ordering a single size and hoping it drops in, you get the full spread on your bench ready to try.
The package includes five center-to-center sizes: .268", .273", .278", .283", and .288". The .278" link is the stock #142R3 equivalent, then you have two undersize and two oversize options on either side of it. That range covers just about any frame, slide, and barrel combination you might be working with, since no two builds fit exactly the same.
The link controls how the barrel drops out of battery and rides on the slide stop pin during the cycle. Get it right and the barrel locks up tight and consistent, which is the foundation of accuracy in a 1911. Too short and the slide stop pin binds against the lugs. Too long and your timing goes sideways. Having every size in reach lets you test-fit and land on the one that gives you a snug, correct lockup.
Wilson Combat has been building custom 1911s and pistol parts since 1977, and their reputation for quality small parts is well earned. These links are made in the USA and fit the whole 1911 family, from Officer and Commander frames up through full-size Government guns. If you're doing a custom barrel job or an accuracy build, this is the kind of part you want to have on hand before you start cutting lugs. Keep in mind barrel links are a fitting component, not a drop-in swap, so plan on some gunsmithing to get it dialed.
The kit includes five links measured center-to-center: .268", .273", .278", .283", and .288". The .278" is the standard #142R3 equivalent, with two undersize and two oversize options around it. Having all five lets you test-fit and land on the exact size your build needs.
No, barrel links are a fitting and timing component, not a drop-in swap. The correct link is chosen after the barrel is fitted to the slide and frame, based on the distance between the lower lugs and the slide stop pin hole. Plan on gunsmith-level fitting to get a proper, tight lockup.
The kit is made for the full 1911 family, including Officer, Commander, Compact, full-size Government, and long-slide platforms. Since every frame, slide, and barrel combination has slightly different tolerances, the range of five sizes is there so you can find the one that fits your specific gun.
Each link is fully machined from 416 stainless bar stock and hardened for durability. That hardening matters because the link and slide stop pin see repeated stress every time the pistol cycles. It's the kind of quality small part Wilson Combat has built its name on.
| UPC | 874218000288 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 142 |
| Model |
You must be logged in to post a review.
Reviews
There are no reviews yet.