Description
Marine-Tex has earned its reputation on boat docks and workbenches for decades, and this 2 oz White kit is the go-to size for small jobs and keeping on hand. It's a two-part epoxy putty that mixes into a thick, creamy paste, so you can pack it into gaps, spread it on vertical surfaces, or shape it over a broken part without it sagging or running. Once it cures, it turns rock hard and takes on a clean white finish that's a natural fit for fiberglass and gelcoat work.
What Marine-Tex White Handles
This stuff bonds, fills, and rebuilds a long list of materials, including wood, fiberglass, ceramic, glass, metal, masonry, and many plastics. It's a favorite for reinstalling stripped or loose fasteners, repairing gouges, and even joining dissimilar metals without worrying about galvanic corrosion. In a gunsmithing context, that makes it handy for bedding jobs, filling voids, repairing synthetic stocks, building up worn surfaces, and anchoring hardware that needs to stay put. For bigger holes, you can lay it in alongside fiberglass tape or cloth for a reinforced, structural repair.
Working With the 2 oz Kit
The kit gives you the resin and hardener you need, mixed at five parts resin to one part hardener by volume. At around 72 degrees you've got roughly 30 minutes of working time, and a full cure runs about 24 hours at a steady temperature. A 2 oz kit covers around 17 square inches at 1/8 inch thick, and you can build it up to a maximum thickness of about 1 1/2 inches. Keeping the epoxy at room temperature before you mix makes for a smoother blend and a cleaner cure.
Finishing and Durability
Once it sets up, Marine-Tex White can be sanded, ground to shape, tapped, drilled, and painted with most common coatings, so you can blend a repair right into the surrounding surface. It's non-rusting and waterproof, and it shrugs off diesel fuel along with many common acids, solvents, and chemicals. The White formula also takes tinting with Evercoat coloring agents when you want to match a specific shade, as long as you keep it under 5 percent of the total volume.
Key Specifications
- Manufacturer: Marine-Tex (ITW Performance Polymers)
- Manufacturer Part Number: RM305C
- UPC: 705643301100
- Color: White
- Kit Size: 2 oz
- Product Type: Two-Part Epoxy Putty
- Mixing Ratio: 5 parts resin to 1 part hardener by volume
- Working Time: About 30 minutes at 72F
- Cure Time: 24 hours at a constant 72F
- Coverage: 17 square inches at 1/8 inch thick
- Maximum Applied Thickness: 1 1/2 inches
- Compressive Strength: 8,700 PSI
- Tensile Strength: 4,000 PSI
- Adhesion Shear Strength: 2,300 PSI
- Waterproof: Yes
What’s Included
- Marine-Tex White epoxy resin (2 oz kit)
- Hardener/catalyst
- Instructions
Frequently Asked Questions
What can I repair with Marine-Tex White?
Marine-Tex White bonds, fills, and rebuilds wood, fiberglass, ceramic, glass, metal, masonry, and many plastics. It's commonly used for reinstalling stripped or loose fasteners, filling gouges, and patching holes or cracks. The white color makes it a good match for fiberglass and gelcoat work, and it can be tinted if you need a specific shade.
How long does Marine-Tex take to cure?
You get about 30 minutes of working time at roughly 72 degrees, so there's enough time for detailed repairs. A full cure takes about 24 hours at a steady temperature. Keeping everything at room temperature before mixing gives you the most consistent results.
Can Marine-Tex White be drilled, tapped, and painted after it cures?
Yes. Once fully cured it hardens like steel and can be sanded, ground to shape, tapped, and drilled. It also accepts most common paints and coatings, so you can finish and blend the repair into the surrounding surface.
Is Marine-Tex White waterproof and chemical resistant?
It is. Cured Marine-Tex is waterproof and non-rusting, and it stands up to diesel fuel along with many common acids, alkalies, solvents, and chemicals. That durability is a big reason it's trusted for repairs that see harsh conditions.





Reviews
There are no reviews yet.