$10.99
10 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The forward assist spring is one of those tiny parts nobody thinks about until it goes missing during a build or wears out somewhere down the road. It sits behind the forward assist button on the right side of your upper receiver, and its whole job is to push the pawl back out after you press the button. Small part, but the assist won't reset without it. This 10-pack from White Label Armory gives you a generous stash of Mil-Spec replacements so you're never stuck hunting for a single spring.
When you press the forward assist to nudge a stubborn bolt carrier into battery, the pawl engages the serrations on the side of the carrier and moves it forward. Once you let off the button, this spring is what returns everything to the resting position, ready for the next press. A weak, kinked, or lost spring means the assist button stays sunk in or feels mushy, so having good replacements on hand keeps that assembly functioning the way it was designed to.
These springs are manufactured to Mil-Spec dimensions and made in the USA, so they drop right into standard AR15 and AR10 upper receivers without any fitment guesswork. Consistent wire tension and clean tolerances mean each one gives you the same reliable return every time, which matters whether you're assembling a fresh upper or repairing an old one.
Forward assist springs are notorious for pinging off the bench and vanishing into the carpet during install, so buying them one at a time gets old fast. A ten count set covers multiple builds, restocks the shop drawer, and leaves plenty for your range bag or field repair kit. If you're a builder, gunsmith, or just the person your buddies call when a part breaks, this pack earns its keep.
When you press the forward assist button to help seat the bolt carrier into battery, the pawl engages the serrations on the carrier and pushes it forward. This spring returns the pawl and button back to the resting position once you release it. Without a working spring, the assist won't reset and the button feels stuck or spongy.
Yes. These are made to Mil-Spec dimensions and are designed to fit standard AR15 and AR10 upper receivers. If your upper takes a common forward assist assembly, these springs will drop right in.
Forward assist springs are tiny and love to disappear off the workbench during install, so having extras saves a lot of frustration. The 10-pack is great for anyone doing multiple upper builds, stocking a gunsmithing bench, or keeping spares in a field repair kit. You'll likely use more than one over time, so buying in bulk just makes sense.
If the button feels rough or won't return, the spring is often the culprit and a simple swap can fix it. Replacing just the spring is quicker and cheaper than replacing the entire assembly. If the pawl or plunger is also damaged, you'd want to look at a full assembly instead.
| UPC | 810155161033 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | WLA-PAC-2007-10 |
You must be logged in to post a review.
Reviews
There are no reviews yet.