Description
Mounting a scope by feel is how crosshairs end up canted and groups end up wandering. The Wheeler Ultra Scope Mounting Kit takes the guesswork out of the whole job by bundling the three tools that matter most into one organized package: a reticle leveling system, the FAT (Firearm Accurizing Torque) wrench, and a professional laser bore sighter. It handles both 1 inch and 30mm scopes, so it covers the vast majority of rifle optics you're likely to run.
What the Wheeler Ultra Scope Mounting Kit Actually Does
Start with the reticle leveling system, which levels your scope to the receiver rather than to the top of a scope base. That distinction matters, because bases aren't always perfectly true, and a level crosshair is what keeps your holdovers and turret adjustments tracking correctly. Once the scope is dialed in level, you tighten the rings with the FAT wrench, which has a torque adjustment range of 10 to 65 inch-pounds and lets you hit the exact spec the ring maker calls for. No stripped screws, no loose optic walking off under recoil.
Bits, Bore Sighting, and the Little Extras
The FAT wrench comes with 10 bits and a 1/4 inch socket covering the common flat blade, hex, and Torx sizes you'll run into on scope rings and bases, plus a Leupold specialty blade. The bits are S2 tool steel hardened to 56 to 58 Rockwell, so they bite and hold up. After mounting, the professional laser bore sighter gets your reticle roughly aligned with the bore so you're on paper faster and burning fewer rounds sighting in at the range.
Wheeler rounds out the kit with a lens pen for keeping glass clean and thread locker so ring screws stay where you set them. Everything rides in a heavy-duty molded carry case that keeps each piece organized and protected, whether it lives on your workbench or travels to the range. This is a kit that pays for itself the first time you mount an optic without cutting corners.
Key Specifications
- Manufacturer: Wheeler Engineering
- Model: Ultra Scope Mounting Kit
- Manufacturer Part Number: 4001009
- UPC: 661120747130
- Scope Sizes Supported: 1" and 30mm
- FAT Wrench Torque Range: 10 to 65 inch-pounds
- Torque Accuracy: +/- 2 in-lbs up to 40 in-lbs; +/- 5% from 40 to 65
- Bits: 10 S2 tool steel bits plus 1/4" socket
- Bit Hardness: 56 to 58 Rockwell C
- Color: Black
- Length: 10.95 inches
- Product Type: Kit
- Case: Heavy-duty molded carry case
- Warranty: Limited lifetime warranty
What’s Included
- Professional Reticle Leveling System
- FAT (Firearm Accurizing Torque) Wrench
- 10 bits (hex to square adapter, #10 flat blade, #32 flat blade, #11 flat blade, 5/32 hex, 7/64 hex, 3/32 hex, T20 Torx, T15 Torx, Leupold specialty flat blade)
- 1/4" socket
- Professional Laser Bore Sighter
- Lens pen
- Thread locker
- Heavy-duty molded carry case
Frequently Asked Questions
What scope sizes does the Wheeler Ultra Scope Mounting Kit fit?
This kit is built for both 1 inch and 30mm scope tubes, which covers the large majority of rifle optics on the market. Between the leveling system, torque wrench, and bore sighter, it handles most bolt action and modern sporting rifle scope setups without needing anything extra.
What is the torque range on the FAT wrench in this kit?
The FAT wrench adjusts from 10 to 65 inch-pounds, so you can dial in the exact spec your scope rings or bases call for. Accuracy runs about plus or minus 2 inch-pounds up to 40 inch-pounds, then plus or minus 5 percent from 40 to 65. That range covers scope ring screws, base screws, and most action screws you'll encounter.
Does the Wheeler Ultra Scope Mounting Kit get my rifle fully sighted in?
The included laser bore sighter gets your reticle roughly aligned with the bore, which puts you on paper faster and saves ammo. Think of it as a head start, not a replacement for final zeroing. You'll still want to confirm and fine tune your zero at the range with live fire.
How does the reticle leveling system keep my crosshairs straight?
It levels the scope to the receiver instead of to the top of the scope base, which is important because bases aren't always perfectly true. A properly leveled reticle keeps your elevation and windage adjustments tracking correctly, so your holdovers land where you expect at distance.







Reviews
There are no reviews yet.