Description
Getting a scope set up right on an AR can be a headache when standard rings leave you craning your neck for a clear picture. The Wheeler MSR Cantilever 30mm Scope Mount solves that by carrying the front ring forward on a 2-inch extension, so your optic sits ahead of the receiver and you fall right into a natural, comfortable cheek weld behind the glass. It's machined from 6061 aluminum with a flat-top ring and a hardcoat matte black anodized finish, which keeps it rigid and light without turning into a heavy chunk of metal up top.
What Sets the Wheeler MSR Cantilever Mount Apart
The standout here is the 6-screw ring design. Most budget mounts give you four screws per ring, but the extra two on each side spread out the clamping force so you can torque to spec without pinching or binding the scope tube. That added bite is what keeps your optic from walking under recoil, even when you're running the rifle hard. The whole thing clamps to a standard Picatinny rail with retained 1/2-inch lock nuts, so there are no loose pieces to fumble during install, and the torx hardware comes in the box.
Dialing In With the MSR Cantilever's Anti-Cant Level
One of the nicer touches is the integrated swing-out anti-cant level. Flip it out when you're posting up for a distance shot, and it gives you a quick visual reference to make sure the rifle isn't tilted, which matters more the farther out you stretch. Tuck it back in when you don't need it. The centerline height sits at 1.4 inches from the top of the rail, a sensible height for most AR-platform setups running a magnified optic.
This mount is built specifically for 30mm scope tubes, so check your optic before ordering. For folks dialing in a new scope on an AR or modern sporting rifle, it's a solid, no-drama foundation that holds zero and gets your eye relief sorted the first time.
Key Specifications
- Manufacturer: Wheeler Engineering
- Manufacturer Part Number: 1099953
- UPC: 661120417231
- Tube Diameter: 30mm
- Style: One-Piece Cantilever Ring Mount
- Cantilever Extension: 2 inches
- Centerline Height: 1.4 in from top of rail
- Ring Design: 6-screw per ring
- Material: 6061 Aluminum
- Finish: Matte Black Hardcoat Anodized
- Rail Compatibility: Picatinny
- Integrated Level: Flip-out anti-cant indicator
- Weight: 9.12 oz
- Country of Origin: USA
What’s Included
- Wheeler MSR Cantilever 30mm Scope Mount
- Flip-out anti-cant indicator level
- Torx mounting hardware
Frequently Asked Questions
What size scope tube does the Wheeler MSR Cantilever mount fit?
This model is built specifically for 30mm scope tubes. Wheeler offers the same mount in 1-inch and 34mm versions, so double-check your optic's tube diameter before you order. The rings are sized for a snug 30mm fit and won't accommodate other diameters without an adapter.
How far forward does the cantilever push the optic?
The mount uses a 2-inch cantilever extension that carries the front ring forward over the handguard. That forward offset lets you position a magnified scope at the correct eye relief on an AR, so you sit naturally behind the glass instead of scooting your head around to find the picture.
Why does it have six screws per ring instead of four?
The 6-screw ring design spreads clamping force more evenly across the scope tube. That lets you torque down to spec with less risk of binding or creating pressure points on the tube, and it gives the optic extra holding power so it stays put under recoil.
Does the Wheeler MSR Cantilever mount work on a Picatinny rail?
Yes. It clamps to a standard Picatinny rail using retained 1/2-inch lock nuts, and the torx hardware you need is included in the box. The retained nuts stay captive in the mount, which makes install and removal cleaner with no small parts to lose.



Reviews
There are no reviews yet.