0
0

Wheeler 1″ MSR Cantilever Scope Mount — Matte Black | 1099909

UPC: 661120417224

$56.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Getting your eye relief right on an AR is half the battle, and that's exactly what the Wheeler 1" MSR Cantilever Scope Mount was built to solve. Flat-top uppers leave you with precious little rail in front of the charging handle, so standard rings usually leave you craning your neck or fighting the stock. This one-piece unit pushes your optic 2 inches forward of the receiver so the scope comes to you, not the other way around. It machines the base and rings as a single block out of 6061 aluminum, which is where that solid, no-flex feel comes from.

What Makes the Wheeler MSR Cantilever Hold Its Zero

The 6-hole ring design is the heart of this mount. Three screws per ring give you serious clamping force on a 1" scope tube, which is what keeps your optic planted during recoil whether you're running a standard load or something that works the action hard. The rings secure to a Picatinny rail with retained 1/2" lock nuts, so clamping down is repeatable and you're not chasing hardware. Folks who've run this mount tend to mention it cradles the scope nicely and comes close to drop-on-ready out of the box, with only light lapping needed if you're chasing perfection. Torx screws are included, and a good starting point on the ring screws is around 18 inch-pounds.

Why the Anti-Cant Level Earns Its Keep

The integrated swing-out anti-cant level is more than a bonus feature. When you're stretching a shot out to distance, even a slight tilt in the rifle throws your impact off, and the flip-out bubble lets you confirm the rifle is level before you break the shot. It tucks out of the way when you don't need it and swings into view when you do.

This mount sits at a 1.4" centerline height from the top of the rail, which lands the optic right at eye level for most AR shooting positions and cheek welds. It's a natural fit for an LPVO in the 1-6x or 1-8x range, a scout-style scope, or any 1" tube optic that needs a bit of forward reach. It's also found a home on platforms beyond the AR, like the CVA Scout, anywhere a flat-top rail needs that forward offset.

Key Specifications

  • Manufacturer: Wheeler Engineering
  • Manufacturer Part Number (MPN): 1099909
  • UPC: 661120417224
  • Style: One-Piece Cantilever
  • Tube Size: 1 inch
  • Forward Extension: 2 inches
  • Centerline Height: 1.4 inches from top of rail
  • Mounting Angle: 0 MOA
  • Material: 6061 Aluminum
  • Finish: Matte Black
  • Ring Design: 6-hole, 3 screws per ring
  • Rail Compatibility: Picatinny
  • Level: Integrated swing-out anti-cant level
  • Shipping Weight: 0.56 lb

What’s Included

  • Wheeler 1" MSR Cantilever Scope Mount
  • Integrated swing-out anti-cant level
  • Torx ring screws and retained lock nuts

Frequently Asked Questions

What size scope tube does the Wheeler MSR Cantilever Mount fit?

This model is built for 1" diameter scope tubes. Wheeler also offers the same cantilever design in 30mm and 34mm versions if your optic uses a larger tube, so double-check your scope's tube diameter before ordering.

Will this cantilever mount work on my AR-15?

Yes, it's designed specifically for flat-top AR-15 platforms and any rifle with a Picatinny rail. The 2" forward extension solves the short-rail problem on AR uppers, and it's also worked well for folks on other flat-top rifles like the CVA Scout.

How much forward eye relief does the 2" extension give me?

The mount pushes your optic 2 inches forward of where standard rings would sit on the receiver. That extra reach is what lets you get a full, clear sight picture without hunching into the rifle, which is especially helpful with an LPVO that has tight eye relief at higher magnification.

Does the Wheeler cantilever mount come with a level?

It does. The integrated swing-out anti-cant level flips into view when you're setting up for a long shot and tucks out of the way the rest of the time, helping you confirm the rifle is level so your reticle stays true at distance.

Additional information

UPC

661120417224

Manufacturer

Manufacturer Part Number

1099909

Shipping Weight

0.56

Style

Cantilever

Reviews

There are no reviews yet.

Be the first to review “Wheeler 1″ MSR Cantilever Scope Mount — Matte Black | 1099909”