$296.99
9 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Building or working on an AR is a lot easier when your tools all live in one place instead of scattered across three different drawers. The Wheeler Delta Ultra Armorer's Kit pulls together 21 pieces built specifically for the AR-15/M16 platform, from the ground-up assembly stuff to the routine cleaning gear you'll reach for after every range trip. Wheeler claims the kit covers over 50 different operations, and once you dig into what's inside, that number checks out.
The heart of the set is the AR Armorer's Vise, which grips the lower through the mag well and has an angle-adjustable front support that cradles the barrel or forend for barrel nut work. Pair that with the combo tool and torque wrench and you can install and time a barrel nut, spin on a castle nut, and snug down a muzzle device without guessing. The upper vise block clamp includes a gas tube alignment tool, and there's a dedicated front sight tool, delta ring tool, and a strap wrench for the jobs that fight back. Pin work gets its own attention too, with a roll pin installation kit plus a pivot pin and roll pin tool that saves you from launching detent springs across the shop.
This isn't just a build kit. You get a .22 caliber bore brush, bolt carrier brush, chamber brush, and a magazine/upper receiver brush, along with a nylon brush handle, a double-ended general cleaning brush, and a plastic pick set for scraping carbon out of tight spots. A bore guide and adjustable receiver link round out the maintenance side. The included maintenance mat lays out an exploded AR-15 diagram, which is genuinely handy when you've got a receiver stripped down and want to keep track of every pin and spring.
Wheeler put this together to work for the weekend builder tackling their first lower just as well as the shop that services ARs all day. Reviewers who've run it note the vise is more solid than expected for a kit tool, and the combo tool and torque wrench take the guesswork out of hitting proper spec. Everything drops back into the custom-fitted case so nothing walks off between projects. Worth noting: this one is dialed in for AR-15/M16, so AR-10 pattern rifles will need different bore and chamber tooling.
Yes. Between the armorer's vise, combo tool, torque wrench, upper vise block, roll pin tools, and front sight tool, this kit covers the core steps of assembling a lower and building or servicing an upper. Many builders pair the included vise with a sturdy bench-mounted vise for the heaviest barrel nut torque, but the kit itself has what you need to complete a standard build.
It's built specifically for the AR-15/M16 platform. The bore guide, chamber brush, and .22 caliber bore brush are sized for the smaller platform, so an AR-10 or .308 pattern rifle will need dedicated cleaning and bore tooling. The vise and several assembly tools can carry over, but plan on supplementing for larger calibers.
The included torque wrench is built for the heavier foot-pound jobs like barrel nuts and castle nuts, which is where a lot of budget wrenches struggle. It takes the guesswork out of hitting proper spec on those fasteners. For lighter inch-pound work like mounting optics, a dedicated inch-pound wrench such as Wheeler's FAT Wrench is a nice companion piece.
It's a solid starting point for someone new to working on ARs. The maintenance mat's exploded diagram helps you keep track of pins and springs during disassembly, and the pivot pin and roll pin tools prevent a lot of the frustration first-timers run into with launched detents. Everything stays organized in the fitted case, so it grows with you from your first lower to routine maintenance down the road.
| UPC | 661120565598 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 156559 |
| Blade Length | Multiple |
| Color | AR TOOLS |
| Length | 22.6000 |
| Model | |
| Product Type | Gunsmithing Kit |
| Shipping Weight | 15.46 |
You must be logged in to post a review.
Reviews
There are no reviews yet.