Description
Wheeler built this one-piece mount to give your 34mm optic a stable, repeatable home on top of a Remington 700 or Savage action. It machines the base and rings from a single block of 6061 aluminum, so there's no stacking a separate base and rings and hoping everything lines up. That solid construction means less flex under recoil and a more consistent zero round after round.
The 20 MOA of elevation built into the base is the real workhorse here. By angling the optic slightly forward, you get back a chunk of your scope's internal elevation travel, which matters a lot when you're dialing for longer distances. If you've ever run out of adjustment trying to reach a far target, this is the fix. Paired with a 34mm tube scope, it's a combination that's right at home on a precision or long-range bolt gun.
What Sets the Wheeler 34mm High 1-Piece Mount Apart
The 6-hole ring design is a nice touch that spreads clamping force more evenly across the scope tube, which helps hold your optic steady without needing to crank the caps down past spec. The high ring height, measuring roughly 1.25 inches from base to centerline, gives most 34mm scopes with larger objectives the clearance they need over the barrel.
Fitment and Setup for the Wheeler 20 MOA Scope Mount
This mount is cut to fit the Remington Model 700 long action, and the same family works across the Remington 700 LA/SA and Savage 10/110 receivers. The standout feature during install is the flip-out anti-cant level, which swings out so you can level the rifle and scope before you tighten everything down. You can position it on the front or rear ring depending on your preference, then tuck it back out of the way once you're squared up. It's finished in a durable matte black anodized coating that holds up to field use and blends in with just about any setup.
Key Specifications
- Manufacturer: Wheeler Engineering
- Manufacturer Part Number: 1108719
- UPC: 661120079156
- Scope Tube Diameter: 34mm
- Ring Height: High (approx. 1.25 in base to centerline)
- Elevation / Cant: 20 MOA
- Material: 6061 Aluminum
- Finish: Matte Black Anodized
- Ring Design: 6-Screw per ring
- Style: Direct Mount, 1-Piece
- Fits: Remington 700 LA/SA and Savage 10/110
- Level: Flip-Out Anti-Cant Level
- Color: Black
- Shipping Weight: 0.565 lb
What’s Included
- Wheeler 34mm High 20 MOA 1-Piece Scope Mount
- Integrated flip-out anti-cant level
- Mounting hardware
Frequently Asked Questions
What rifles does the Wheeler 34mm High 1-piece mount fit?
This mount is designed for the Remington Model 700 long action. Wheeler's one-piece bolt action mounts in this family are built to work across the Remington 700 LA/SA and Savage 10/110 receivers. Always double-check your receiver's hole pattern and action length before ordering.
Why would I want the 20 MOA built into the base?
The 20 MOA of forward cant gives you back a good portion of your scope's internal elevation travel. That extra adjustment range lets you dial for targets at longer distances without running out of clicks. It's a common choice for precision and long-range bolt action setups.
Will a 34mm scope with a large objective clear the barrel on the high rings?
The high ring height measures roughly 1.25 inches from base to centerline, which gives most 34mm optics with larger objectives enough room over the barrel. If you're running an especially large objective, measure your scope's objective diameter and compare it against your barrel contour to confirm clearance before you mount.
How does the flip-out level help during installation?
The anti-cant level swings out so you can level both the rifle and the scope reticle while you tighten everything down, which keeps your crosshairs square to the bore. You can set it up on either the front or rear ring based on your preference. Once you're leveled and torqued, it folds back out of the way.




Reviews
There are no reviews yet.