Description
The Weaver Precision Tactical Rings 99524 are built for folks who care about holding zero and getting their glass sitting right. These are the 34mm low-height version, cut from 7075-T6 aluminum and finished in a matte Type III hardcoat anodize that shrugs off scuffs and weather. If you are running a 34mm maintube scope and want it mounted close to the bore, this set gives you a clean, no-nonsense platform to build on.
What Sets the 99524 Precision Tactical Rings Apart
The standout here is the heavy-duty integral cross bolt, which delivers true mechanical lock-up onto your rail instead of relying on a thin clamp. That translates to a mount that stays put under recoil and repeated use. They are fully compatible with standard Picatinny rails and bases, so they will drop onto just about any modern precision rifle, AR platform, or duty gun you are setting up.
Dialing In Your Weaver 34mm Low Rings
Installation is straightforward with the durable Torx head cap screws, which let you apply even, repeatable clamping pressure across the optic. Weaver's recommended torque specs are 25 in-lbs on the cap screws and 65 in-lbs on the cross bolt, so grab a good torque wrench and snug everything down evenly in a crisscross pattern. Getting the torque right the first time is what keeps your optic protected and your zero honest trip after trip.
Low Height for a Reason
The low profile is a smart pick when you are running a scope with a smaller objective bell or you simply want the lowest practical sight line over the rail for a better cheek weld. Proudly made in America, the 99524 rings are a dependable choice whether you are building out a precision bolt gun, outfitting a competition rig, or finishing a tactical setup that needs to take a beating and keep tracking true.
Key Specifications
- Manufacturer: Weaver
- Manufacturer Part Number: 99524
- UPC: 604544696479
- Tube Diameter: 34mm
- Ring Height: Low
- Material: 7075-T6 Aluminum
- Finish: Matte Black, Type III Hardcoat Anodized
- Mount Type: Picatinny Compatible
- Cross Bolt: Heavy-duty integral cross bolt
- Fasteners: Torx head cap screws
- Cap Screw Torque: 25 in-lbs
- Cross Bolt Torque: 65 in-lbs
- Country of Origin: Made in USA
- Shipping Weight: 0.3 lbs
What’s Included
- One pair of Weaver Precision Tactical 34mm low rings
- Torx head cap screws and cross bolt hardware
Frequently Asked Questions
What size scope tube do the Weaver Precision Tactical Rings 99524 fit?
These are built specifically for 34mm maintube scopes. If your optic has a 1-inch or 30mm tube, you will want a different ring set. Check the tube diameter marked on your scope before ordering to make sure it is a 34mm.
Will these rings mount to a Picatinny rail?
Yes. The 99524 rings use a heavy-duty integral cross bolt and are fully compatible with standard Picatinny rails and bases. They clamp down for solid mechanical lock-up on most modern rifles and AR platforms.
What torque should I use when installing these Weaver rings?
Weaver recommends 25 in-lbs on the Torx cap screws and 65 in-lbs on the cross bolt. A quality torque wrench is worth using here so you get even clamping and avoid over-tightening on your scope tube. Tighten the cap screws in a crisscross pattern for the most even hold.
Why would I choose the low height version over medium or high?
Low rings are a good match for scopes with smaller objective bells and when you want the optic sitting as close to the bore as practical. That lower sight line often gives a more natural cheek weld. If your scope has a large objective, step up to medium or high so the bell clears the rail.




Reviews
There are no reviews yet.