Description
The Weaver Precision Rings 48383 give you a dependable way to mount a 1-inch tube scope when you need serious height over the bore. These are the X-high option in Weaver's Precision lineup, built for large objective optics or setups where you need extra clearance and a comfortable sight picture. Machined right here in the USA, they carry the no-nonsense reputation Weaver has earned since 1930.
What Sets the 48383 Precision Rings Apart
These rings are cut from 7075-T6 aluminum, which gives you an excellent strength-to-weight balance without the bulk of a steel setup. A Type III hardcoat anodized matte black finish keeps glare down and shrugs off weather, wear, and the chemicals that come with regular range time. The low-profile footprint sits clean on the receiver, so you get a tidy look that still delivers plenty of elevation for bigger glass.
How the Precision Rings Hold Zero
The real heart of these rings is the recoil lug. It seats into the slot on your rail and locks the ring assembly in place, stopping the fore and aft creep that costs you zero under recoil. Pair that with the no-strip Torx head cap screws and you get repeatable, confidence-inspiring alignment every time you take the setup out. Weaver's recommended torque is 25 inch-pounds on both the cap screws and the clamp screw, so a good torque wrench makes installation quick and consistent.
Fitting the 48383 to Your Rifle
The 48383 clamps to both Weaver and Picatinny-style rails and bases, which opens them up to a huge range of bolt guns, modern sporting rifles, and rimfire setups. The X-high height is the pick when you are running a large objective scope beyond the clearance of standard rings, or on a straight-comb rifle like an AR where you need the optic lifted to line up with your eye. They ship as a matched pair, ready to get your 1-inch scope locked in and shooting straight.
Key Specifications
- Manufacturer: Weaver
- Manufacturer Part Number: 48383
- Model: Precision 1" X-High
- UPC: 604544696356
- Ring Diameter: 1 inch
- Ring Height: Extra High (X-High)
- Material: 7075-T6 Aluminum
- Finish: Type III Hardcoat Anodized Matte Black
- Mount Compatibility: Weaver and Picatinny rails and bases
- Hardware: Torx Head Cap Screws
- Recoil Lug: Yes
- Recommended Torque: Cap Screws 25 in-lbs, Clamp Screw 25 in-lbs
- Sold As: Pair
- Country of Origin: Made in USA
- Shipping Weight: 0.3 lbs
What’s Included
- Pair of Weaver Precision 1-inch X-High rings
- Torx head cap screws and clamp hardware
Frequently Asked Questions
What size scope tube do the Weaver Precision 48383 rings fit?
These rings are built for scopes with a 1-inch main tube. They will not fit 30mm or 34mm tubes, so double check your scope's tube diameter before ordering. Weaver offers the Precision line in 30mm sizes if you need a larger ring.
Will the 48383 rings work on both Weaver and Picatinny rails?
Yes. The Precision 48383 rings clamp to both Weaver and Picatinny-style rails and bases, so they cover most common mounting setups. A Weaver-spec locking bar drops into a Picatinny slot with room to spare, which is why these cross over so well.
How high are the X-High rings, and when should I use them?
X-High is the tallest standard height in Weaver's 1-inch Precision line, giving you the most clearance for large objective scopes beyond 56mm. They are also a smart pick for straight-comb rifles like ARs, where you need the optic lifted to naturally line up with your eye. If your scope clears the barrel fine with a shorter ring, you can step down to the High, Medium, or Low options.
What torque should I use when installing the Precision 48383 rings?
Weaver recommends 25 inch-pounds on both the cap screws and the clamp screw. Using a proper torque wrench keeps the clamping pressure even and helps protect your scope tube from being over-tightened. Even torque across the screws also helps the setup hold zero consistently.





Reviews
There are no reviews yet.