$30.99
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A crooked scope is one of those problems you don't notice until you're stretching out past 100 yards and your shots start drifting left or right for no clear reason. The Weaver Modular Level System is built to head that off at the mounting stage by making sure your scope's crosshairs are square to the receiver before you ever torque down the rings. It's a straightforward, no-nonsense tool that trades fiddly trial-and-error for a repeatable reference you can trust.
The system uses two bubble vials working together. One level sits on a flat spot of the receiver to establish your baseline, and the second reads off the scope so you can bring the two into agreement before final tightening. When both bubbles are centered, your reticle is plumb to the bore, which is exactly what keeps your windage and elevation adjustments tracking true instead of shifting point of impact both directions.
The magic here is the modular magnetic base. High-strength magnets slide and adjust to the width of your firearm, so the tool grabs onto pretty much any steel receiver with a flat surface and holds tight. That frees up both your hands to work the rings and screws instead of juggling a level that won't stay put. It's a small thing that makes a real difference when you're doing this solo at the bench.
Using it is about as simple as gun tools get. Place the receiver level and confirm it's centered, snug your scope in the rings just enough to hold, then set the second level and rotate the scope until that bubble matches. Once your eye relief feels right and both bubbles agree, tighten everything down. Folks who've run this setup tend to appreciate how quick and accurate it is for the money, and it earns a permanent spot in the toolbox for anyone who mounts more than a scope or two a year. Compact enough to toss in a range bag, it's just as handy for a field re-mount as it is for a full shop setup.
It uses two bubble levels at once, one referenced off a flat part of the receiver and one off the scope. When you rotate the scope until both bubbles center, the reticle is plumb to the bore. That alignment is what keeps your elevation and windage adjustments tracking true instead of pulling shots off to the side at distance.
The magnetic base is designed to slide and adjust to the width of your firearm, so it works on most steel receivers that have flat spots to grab. The magnets are strong enough to hold the tool in place and free up both your hands while you work. Just keep in mind you need a ferrous, steel surface for the magnets to bite.
Not necessarily. The dual-level method squares your reticle to the receiver on its own, which is enough for most mounting jobs. That said, some precision shooters like to double-check with a plumb bob at distance, and you're free to combine methods if you want that extra confirmation.
For a one-time mount you can get by with trial and error, but this tool takes the guesswork out and gives you a repeatable result every time. It's compact, easy to use, and earns its place if you set up your own rifles or help buddies with theirs. Plenty of casual owners keep one around simply because it makes a fussy job painless.
| UPC | 076683897244 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 849724 |
| Shipping Weight | 0.1125 |
You must be logged in to post a review.
Reviews
There are no reviews yet.