Description
Mounting a scope on your Weatherby 307 short action is a whole lot easier when the base is built for the job. The PEAK 44 Picatinny Rail, better known as the JRail, is a one-piece mount cut specifically for the 307 SA receiver, so the screw spacing lines up right out of the package. It carries a 20 MOA built-in slope, which tilts your optic forward to give you more usable elevation for reaching out at distance without running out of internal adjustment.
What Sets the JRail Apart on a 307
The standout feature here is that rear cutout the JRail is named for. That little piece of design lets you run lower rings while still clearing the bolt and bigger objective bells, which means you can set the scope where it needs to be for a comfortable cheek weld and correct eye relief. Pairing a large objective hunting or target scope with low-to-medium rings is usually a headache on a standard base, and this layout takes a lot of that guesswork out.
Built Tough and Ready for Picatinny or Weaver Rings
The base is machined from aerospace-grade aluminum and finished in matte black, so it shrugs off weather and field abuse while keeping the weight down at right around 0.18 pounds. The Picatinny profile accepts both Picatinny and Weaver style rings, so whatever quality rings you already trust will clamp right on. For the Model 307, it uses #8-40 screws torqued to 20 inch-pounds, and a T10 Torx bit comes in the package so you can get it installed without hunting for the right tool.
Dialed In for Long-Range Work
That 20 MOA slope is the real selling point for anyone stretching their rifle's legs. It frees up more elevation in your scope's turret, which keeps you in the sweet spot of your adjustment range when you dial for those longer shots. Snug everything down to spec, a drop of thread locker never hurts, and you've got a solid, repeatable foundation for your glass.
Key Specifications
- Manufacturer: Weatherby
- Model: PEAK 44 Picatinny Rail (JRail)
- MPN / Part Number: J010004
- UPC: 747115451982
- Fits: Weatherby Model 307 Short Action
- MOA: 20 MOA
- Mount Type: Picatinny / Weaver
- Material: Aerospace-grade aluminum
- Finish: Matte Black
- Mounting Hardware: #8-40 screws
- Torque Spec: 20 in/lbs
- Included Tool: T10 Torx bit
- Length: 9.05 in
- Weight: Approx. 0.18 lbs
What’s Included
- Weatherby PEAK 44 JRail 20 MOA Picatinny scope base (Model 307 SA)
- #8-40 mounting screws
- T10 Torx bit
Frequently Asked Questions
What rifle does the PEAK 44 JRail Model 307 SA base fit?
This base is cut specifically for the Weatherby Model 307 short action receiver, so the hole spacing matches without modification. It is not the long action version, which is a separate part number. If your 307 is a short action chambering, this is the one you want.
What does the 20 MOA on this JRail base do for me?
The 20 MOA means the base is built with a forward slope that tilts your scope down slightly. This gives you extra elevation in your scope's adjustment range, which is a big help for long-range shooting so you don't run out of dial when reaching for distant targets. For closer, general-purpose use a flat base also works, but the 20 MOA is the better pick if you plan to stretch things out.
What rings work with the PEAK 44 Picatinny Rail?
It accepts both Picatinny and Weaver style rings, so most quality aftermarket rings will clamp right on. The JRail rear cutout also lets you run lower rings while still clearing larger objective bells, which helps you get proper eye relief and a good cheek weld.
Does this base come with the screws and a tool to install it?
Yes, it ships with the #8-40 screws for the Model 307 and a T10 Torx bit so you can get it mounted. Torque the screws to 20 inch-pounds, and a dab of thread locker is a smart touch to keep everything holding zero over time.





Reviews
There are no reviews yet.