$4,649.00
3 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
There's something about a walnut-stocked .375 H&H that just feels right, and Weatherby leaned into that with the Mark V Frontier. This rifle is a nod to the early Weatherby magnums that built the brand's reputation, with an exhibition-grade walnut Monte Carlo stock crafted and finished in Italy, complete with a rosewood forend tip and grip cap set off by maple spacers and hand-cut checkering. Each stock is picked by hand for figure and balance, so no two rifles look exactly alike. Underneath all that wood sits the proven Mark V action with its famously smooth 54-degree bolt throw, giving you faster cycling and extra scope clearance when a quick second shot matters.
The 24-inch barrel, receiver, bolt, and trigger guard all wear Graphite Black Cerakote, so the metalwork shrugs off rough weather whether you're in the Alaskan bush or African thornveld. The muzzle is threaded and ships with Weatherby's Accubrake ST installed, which knocks felt recoil down substantially and keeps the muzzle flatter for follow-ups. Rugged NECG iron sights come fitted from the factory, a smart touch on a dangerous game rifle where close-range backup sights earn their keep, and the receiver is drilled and tapped when you're ready to mount glass.
The externally adjustable TriggerTech trigger breaks clean with zero creep and minimal overtravel, and you can tune the pull weight without pulling the action from the stock. Weatherby backs every Mark V with its sub-MOA guarantee: a three-shot group of .99 inches or better at 100 yards from a cold barrel with Weatherby factory or premium ammo. With a 3+1 capacity and the flat-shooting, hard-hitting .375 H&H Magnum on tap, this is a rifle you can carry on a once-in-a-lifetime hunt and pass down afterward. It handles like a working rifle and finishes like an heirloom, which is exactly what the Frontier was built to be.
Yes, the Frontier ships with Weatherby's Accubrake ST already installed on the threaded 24-inch barrel. The brake adds roughly two inches to the overall barrel length and makes a real difference taming .375 H&H recoil. Since the muzzle is threaded, you can also remove the brake and run other muzzle devices if you prefer.
You can absolutely run glass. The receiver is drilled and tapped for scope bases, so mounting an optic is straightforward. The factory-fitted NECG iron sights stay put as a rugged backup, which is a setup a lot of dangerous game hunters prefer for close-range work.
Yes. It uses a TriggerTech trigger that's externally adjustable, so you can fine-tune the pull weight without tearing the rifle down. The design gives a zero-creep break with very short overtravel, and the stainless steel internals keep pulls consistent shot to shot.
Weatherby guarantees every Mark V will print a three-shot group of .99 inches or less at 100 yards from a cold barrel using Weatherby factory or premium ammunition. That sub-MOA promise applies within two years of purchase to the original owner. For a big-bore hunting rifle, that's plenty of accuracy for anything the .375 H&H is suited for.
| UPC | 747115460045 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MFT01N375HR6B |
| Action | |
| Barrel Length | 24" |
| Caliber/Gauge | .375 H&H Magnum |
| Capacity | 3 + 1 |
| Sights | Iron |
You must be logged in to post a review.
Reviews
There are no reviews yet.