Description
Weatherby set out to build the ultimate mountain rifle with the Mark V Backcountry Guide Ti, and the spec sheet backs it up. The heart of the rifle is a Mark V titanium action machined in Sheridan, Wyoming, which shaves roughly half a pound compared to a steel receiver while shrugging off moisture and rough weather. Wrapped around it is a Peak 44 Blacktooth carbon fiber stock, one of the lightest production stocks made, with two Spartan Precision adapters molded into the forend so you can run Spartan bipods and accessories without adding hardware you don't need.
A .240 Weatherby Magnum That Carries Like a Daypack
The .240 Weatherby Magnum is a sleeper of a cartridge, pushing 6mm bullets fast and flat with mild recoil, which makes it a natural fit for pronghorn, deer, and long walks above treeline. The 22 inch BSF carbon fiber barrel keeps weight down without giving up stiffness, since the carbon sleeve is loaded under tension over a 416R stainless core and most of it never touches the barrel, helping it cool quickly between shots. The current 1:7.5 twist stabilizes heavier, high BC bullets that older 6mm barrels couldn't handle, so modern long-range hunting loads are on the table. Up front, the factory Accubrake ST uses 30 symmetrical ports to knock felt recoil down dramatically, and the 5/8×24 threads give you options if you'd rather run a suppressor.
Guide Ti Details That Earn Their Keep
The fluted bolt runs on a short 54 degree throw, leaving plenty of clearance for big scope eyepieces and making fast follow-ups easy. A TriggerTech trigger breaks clean with zero creep and adjusts externally down to 2.5 pounds. The 3DHex recoil pad uses a printed honeycomb structure that collapses progressively under recoil, turning the push into something soft even from field positions. Feeding comes from a 4+1 capacity, and the receiver arrives drilled and tapped for your optic of choice. Like every Mark V, it carries Weatherby's sub-MOA guarantee, so the accuracy is baked in before you ever chamber a round. For hunters counting ounces on every climb, this one is tough to top.
Key Specifications
- Manufacturer: Weatherby
- Manufacturer Part Number: MGT01N240WR4B
- UPC: 747115457540
- Caliber: .240 Weatherby Magnum
- Action: Mark V 6-Lug Bolt Action, Titanium Receiver
- Barrel: 22" BSF Carbon Fiber, 416R Stainless Core
- Twist Rate: 1:7.5
- Muzzle: Threaded 5/8×24 with Accubrake ST
- Capacity: 4+1
- Stock: Peak 44 Blacktooth Carbon Fiber with Spartan Precision Adapters
- Trigger: TriggerTech, Externally Adjustable to 2.5 lbs
- Recoil Pad: 3DHex 3D-Printed Honeycomb Pad
- Sights: None, Drilled and Tapped for Optics
- Safety: 2-Position Bolt Mounted
- Weight: Approx. 5.1 lbs
- Accuracy Guarantee: Sub-MOA (3-shot group of .99" or less at 100 yards)
What’s Included
- Weatherby Mark V Backcountry Guide Ti rifle
- Factory-installed Accubrake ST muzzle brake
- Spartan Precision gunsmithing adapters (factory installed in forend)
- Owner's manual
Frequently Asked Questions
How much does the Mark V Backcountry Guide Ti weigh in .240 Weatherby Magnum?
The Backcountry Guide Ti series starts at roughly 5.1 pounds, and the .240 Weatherby Magnum sits at the light end of the lineup thanks to the 6-lug titanium action. Even with a scope and sling mounted, you're looking at a rifle that carries lighter than most bare setups. That's the whole point of this build.
Can I run a suppressor on the Backcountry Guide Ti instead of the brake?
Yes. The Accubrake ST threads onto a standard 5/8×24 muzzle, so it comes off easily and most common suppressors will spin right on. Just keep in mind the .240 Wby Mag is a mild-recoiling cartridge in the first place, so plenty of owners run it either way and re-zero after swapping.
What bullet weights work with the .240 Weatherby's twist rate?
Weatherby updated the .240 Wby Mag twist to a fast 1:7.5, which stabilizes heavy, high-BC 6mm bullets in the 100 grain and up range that older 1:10 barrels struggled with. It still shoots lighter varmint-weight bullets fine, so you get flexibility from coyotes up to deer and antelope at distance.
Does the Backcountry Guide Ti come with sights or scope bases?
No, it ships without sights, and the titanium receiver comes drilled and tapped so you can mount the bases or rail of your choice. The 54 degree bolt throw leaves generous clearance for large scope eyepieces, so low mounting is easy. Plan on picking up rings and an optic to complete the setup.



Reviews
There are no reviews yet.