$43.99
6 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
A tilted reticle is one of those small mistakes that quietly wrecks accuracy, and the problem only gets worse the farther you reach out. The Warne Vapor 1" Scope Level solves it with a simple, no-nonsense bubble level that mounts straight onto a 1-inch scope tube and gives you a clear reference without pulling your eye off the glass. It's machined from lightweight aluminum with a matte black finish, and at just 0.65 ounces it adds almost nothing to your rig.
When your rifle is canted even a few degrees, your bullet drifts to the side as range increases, and holdovers that worked up close start missing low and off to one side. The Vapor level gives you a constant visual check so you can square the rifle up before you break the shot. That consistency pays off most in precision work, where the difference between a center hit and an edge hit can come down to a degree or two of tilt.
Warne recommends installing it in front of the turret assembly on your weak-eye side. Set up that way, the bubble appears to float right near your reticle when you shoot with both eyes open, so you can confirm level and your aiming point at the same time without shifting your head. The clamp design works for both right and left-hand setups, making it a practical pick no matter how you run your rifle.
This is the 1-inch tube version (part number V650M), built for scopes with a 1-inch main tube. Installation is straightforward and it's designed and made in the USA, backed by a lifetime warranty. If you shoot a 30mm or 34mm scope, Warne offers the Vapor level in those tube sizes as well, so double-check your tube diameter before ordering to make sure you grab the right fit.
This version is built specifically for scopes with a 1-inch main tube. Warne also makes the Vapor level in 30mm and 34mm sizes, so measure or check your scope's tube diameter before ordering. Clamping it onto the wrong tube size won't give you a secure, accurate fit.
Warne recommends installing it in front of the turret assembly on your weak-eye side. In that position, the bubble appears to float near your reticle when you shoot with both eyes open, letting you confirm level and aim at the same time. The clamp works for both right and left-hand configurations.
Barely any. It weighs about 0.65 ounces thanks to its lightweight aluminum construction, so you won't notice it on the rig. It stays low-profile and out of the way while still being easy to read from your shooting position.
Even a slight cant in your rifle throws your bullet off to the side, and that error grows the farther you shoot. A level like the Vapor gives you a quick visual check so you can square the rifle before every shot. It's a small part that makes a real difference in long-range consistency.
| UPC | 656813113910 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | V650M |
You must be logged in to post a review.
Reviews
There are no reviews yet.