0
0

VKTR VK1 5.56 NATO 10.5in Piston AR Pistol FDE with SBA3 Brace

UPC: 810155166182

$2,299.00

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Most piston ARs make you trade weight and bulk for a cleaner running gun. The VKTR VK1 doesn't. Its patented short-stroke piston system uses a cup and spigot design for a tighter gas seal, plus a staged gas bleed with two sets of exhaust ports that dumps excess pressure once the gun has cycled. The practical upshot is a 10.5 inch 5.56 that runs everything from soft .223 range ammo to hot NATO loads, suppressed or not, without any gas adjustment on your end. And because the system matches the footprint of a standard direct impingement AR, this pistol comes in right around six pounds.

What Sets the VK1 Pistol Apart

The 10.5 inch barrel is cold hammer forged with a QPQ nitride finish, machined cooling flutes, a 1:7 twist, and 1/2×28 threads wearing an A2 flash hider. It's thermally fit to a forged upper, and the 9.85 inch handguard carries a full Picatinny top rail with M-LOK slots at 3, 6, and 9 o'clock plus generous venting to shed heat off the piston system. Inside, the one-piece bolt carrier runs a 22.5 degree extended cam path in a thin dense chrome finish for smoother cycling and longer dwell time. VKTR didn't skimp on the parts you touch either: a 4.5 pound single-stage Hiperfire trigger, Radian Raptor charging handle, Radian Talon selector, and Magpul K2 grip, all wrapped in Cerakote Flat Dark Earth with an SB Tactical SBA3 adjustable brace out back.

Running the VKTR VK1 Day to Day

Owners consistently point to the same things: flat recoil, minimal gas in the face, and a bolt carrier that stays remarkably clean even after long range sessions. That last part matters more than people think, since piston guns push carbon out at the gas block instead of into the receiver. The controls are fully ambidextrous, with billet machined mag release, bolt catch, and selector, which makes this an easy pick for lefties or anyone training support side. It ships with one 30-round magazine, and the flat top receiver gives you a clean slate for whatever optic setup you prefer. For a compact 5.56 that runs clean and shoots flatter than most guns twice its barrel length, the VK1 is tough to beat.

Key Specifications

  • Manufacturer: VKTR Industries
  • Model: VK-1P
  • MPN: V31100916618
  • UPC: 810155166182
  • Caliber: .223 Rem / 5.56 NATO
  • Action: Semi-Auto, Short-Stroke Piston
  • Barrel: 10.5" Cold Hammer Forged, 1:7 Twist, Cooling Flutes
  • Muzzle Device: A2 Flash Hider, 1/2×28 Threads
  • Handguard: 9.85" VK-1 M-LOK Free-Float Rail
  • Trigger: Hiperfire Single Stage, 4.5 lb
  • Charging Handle: Radian Raptor
  • Brace: SB Tactical SBA3, Adjustable
  • Grip: Magpul MOE K2
  • Capacity: 30 Rounds
  • Weight: Approx. 6 lbs
  • Finish: Cerakote Flat Dark Earth
  • Sights: None (Optics Ready Picatinny Rail)

What’s Included

  • VKTR VK1 5.56 NATO pistol with SBA3 brace installed
  • One 30-round magazine
  • Cable lock
  • Case

Frequently Asked Questions

Is the VKTR VK1 pistol heavier than a comparable direct impingement AR?

Not really, and that's the whole point of the design. The VK-1 piston system was engineered to match the footprint and weight of a standard DI gas system, so the complete 10.5 inch pistol comes in around six pounds. You get the clean-running benefits of a piston gun without the front-heavy feel most piston ARs are known for.

Does the VK1 run well with a suppressor?

Yes, and this is one of its biggest strengths. The staged gas bleed system self-regulates pressure, so it cycles reliably suppressed or unsuppressed with a wide range of factory ammo, no gas adjustment needed. Since it's a piston gun, gas blowback to your face is minimal even when running a can, which is a common complaint with short-barreled DI guns.

Does the VKTR VK1 come with sights or an optic?

No, it ships without sights. The upper receiver and handguard have a continuous Picatinny top rail with T-marks, so you can mount a red dot, LPVO, prism sight, or backup irons however you like. Plan to budget for an optic before your first range trip.

Can I swap the handguard on the VK1?

The handguard is designed as part of the operating system on this platform, so it's meant to stay put. That said, it gives you M-LOK slots at the 3, 6, and 9 o'clock positions plus a full top rail, so there's plenty of room for lights, hand stops, and other accessories. The heavy venting also does a nice job managing heat off the piston system.

Additional information

UPC

810155166182

Manufacturer

Manufacturer Part Number

V31100916618

Action

Barrel Length

10.5"

Caliber/Gauge

.223 REM/5.56 NATO

Capacity

30

Color

Flat Dark Earth

Length

31.3500

Number of Magazines

1

Safety

Selector Switch

Sights Type

NONE

State Restriction (CA)

NO DIRECT SHIP TO CALIFORNIA

State Restriction (RI)

NO DIRECT SHIP TO RHODE ISLAND

State Restriction (WA)

NO DIRECT SHIP TO WASHINGTON

Reviews

There are no reviews yet.

Be the first to review “VKTR VK1 5.56 NATO 10.5in Piston AR Pistol FDE with SBA3 Brace”