$19.97
148 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The UTG Leapers Micro Gas Block is one of those parts that just does its job and gets out of the way. It's built for standard AR-15 barrels measuring .750 inches at the gas port, and the micro footprint means it slides right underneath most free-float handguards without any clearance headaches. If you're running a slim rail and want a clean profile with no bulge, this is the kind of block that makes that build come together.
Leapers machines this one from 4140 steel to tight tolerances, so the bore tends to run snug on the barrel journal, which is exactly what you want for a solid, repeatable fit. The manganese phosphate finish adds real corrosion resistance and gives it that flat, non-reflective look that blends in under a handguard. It runs on standard direct impingement gas systems, so there's no learning curve here. This isn't an adjustable block, and that's the point for a lot of builders. Fewer moving parts, less to fuss over, and nothing to drift out of tune once you've got your gas dialed at the port.
Everything you need to mount it comes in the box. You get the gas tube roll pin, serrated self-locking set screws, and a 3/32-inch Allen wrench, so you're not hunting through a parts drawer to finish the job. Leapers lists a recommended torque of 12 in-lbs on the set screws, and a dab of thread locker on those aggressively knurled screws keeps everything staying put through recoil. It's a straightforward install for anyone comfortable working on their own upper.
For the price of admission, this is a hard block to argue with. Builders consistently note how well machined and finished it is for a budget part, with fit and tolerances that hold up against gas blocks costing a good bit more. If you don't need adjustability and just want a reliable, low-profile block that disappears under your rail, the UTG Micro Gas Block earns its spot.
Yes, the micro low-profile design is built specifically to clear most free-float handguards without interference. Its compact footprint is one of the main reasons builders choose it for slim-rail setups. As always, check your handguard's inner diameter and gas block cutout if you're running an especially tight rail.
It's made for AR-15 barrels that measure .750 inch in diameter at the gas port, which is one of the most common standard sizes out there. The steel bore tends to run snug on the journal for a solid, repeatable fit. Measure your barrel at the gas port before ordering if you're unsure.
No, this is a fixed, non-adjustable block. That simplicity is a plus for a lot of builds since there are fewer parts to fuss with and nothing that can drift out of tune. If you need to fine-tune gas flow for a suppressor or specific loads, you'd want to look at an adjustable model instead.
It does. The box includes the gas tube roll pin, serrated self-locking set screws, and a 3/32-inch Allen wrench. Leapers recommends torquing the set screws to about 12 in-lbs, and adding a little thread locker helps keep everything locked in through repeated firing.
| UPC | 4717385554764 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | MNT-ARMGB01 |
| Color | Black |
| Length | 4.3500 |
| Model | |
| Product Type | Gas Block |
You must be logged in to post a review.
Reviews
There are no reviews yet.