Description
The UTG 1-8X28 30mm MRC scope is built for the modern sporting rifle crowd who want one optic that does it all. At 1x it works like a red dot for fast, both-eyes-open shooting up close, then dials up to 8x when you need to stretch things out and pick apart a target at distance. The 30mm main tube and emerald-coated lenses pull in plenty of light for a bright, clear picture across that whole range, and it sits on a second focal plane so the reticle stays the same visual size no matter your magnification.
What the BG4 Reticle Brings to the Table
The etched glass BG4 reticle is the heart of this scope. It uses three tick posts that pull your eye straight to center for quick target acquisition, then gives you ballistic drop compensation and rangefinding marks calibrated out to 600 yards. That data is tuned around common 5.56 and .223 loads, so if you're running an AR-15 this reticle just makes sense. Zero the center dot at 100 yards and the holdover references line right up. The reticle stays black when illumination is off, and when you flip it on you get red and green dual color plus 36 total brightness and color modes to match whatever light you're dealing with.
Built to Take a Beating
UTG put this on their True Strength platform, and the whole scope is sealed and nitrogen filled so it shrugs off fog, rain, and hard recoil. The low profile EZ-TAP illumination housing has reinforced circuitry that keeps the reticle lit even under heavy recoil, and a one-click memory feature drops you back to your last color and brightness setting. The zero lockable and resettable target turrets adjust in 1/2 MOA clicks, and a TactEdge angled sunshade is built right into the objective to cut glare.
Mounting the UTG 1-8X28 MRC
One of the best parts is that it ships ready to run. The included ACCU-SYNC 30mm high profile ring mount has a 34mm offset cantilever design that gets the scope pushed forward for proper eye relief on an AR flat-top, and flip-up lens covers keep the glass protected between range trips. It leans a little on the heavier side, but folks who run it tend to say the durability and value are worth carrying the extra ounces.
Key Specifications
- Manufacturer: Leapers UTG
- MPN: SCP3-18IEBG4
- UPC: 4717385554733
- Magnification: 1-8x
- Objective Diameter: 28mm
- Tube Diameter: 30mm
- Reticle: BG4 Etched Glass
- Focal Plane: Second Focal Plane (SFP)
- Illumination: Red/Green Dual-Color, 36 Modes (EZ-TAP IE)
- Field of View @ 100 yds: 99.5 ft – 13 ft
- Eye Relief: 5 in – 3.35 in
- Exit Pupil: 26.5 – 3.4 mm
- Adjustment Click Value: 1/2 MOA per click
- Parallax: Fixed at 100 yards
- Length: 17.4 in
- Finish: Matte Black Aluminum
What’s Included
- UTG 1-8X28 30mm MRC IE rifle scope
- ACCU-SYNC 30mm high profile 34mm offset Picatinny cantilever ring mount
- Flip-up lens covers
- Battery for illumination
- Instruction manual
Frequently Asked Questions
What rifle is the UTG 1-8X28 MRC scope best suited for?
It's a natural fit for AR-15 and other 5.56/.223 modern sporting rifles. The BG4 reticle's bullet drop compensation is built around common 5.56 and .223 loads, and the included cantilever mount is designed for AR flat-top receivers. That said, plenty of folks run it on other platforms too since the 1-8x range is so versatile.
How far out will the BG4 reticle let me shoot?
The BG4 reticle has holdover and rangefinding references calibrated out to 600 yards. To make those marks track correctly, you'll want to zero the center dot at 100 yards. Users running it on 16-inch 5.56 rifles have reported connecting on targets clear out to that 600-yard mark without much trouble.
Does the reticle work without illumination?
Yes. The BG4 is an etched glass reticle, so it stays fully visible and black when the illumination is switched off. When you do turn it on, you get red and green dual color plus 36 brightness and color modes, and a memory feature returns you to your last setting.
Do I need to buy a separate mount for the UTG 1-8X28 scope?
No, the mount is already included. This scope ships with the ACCU-SYNC 30mm high profile ring mount that has a 34mm offset cantilever design to set proper eye relief on an AR. You'll be able to bolt it to a Picatinny rail and get to zeroing right away.





Reviews
There are no reviews yet.