Description
If you've chased tighter groups with your 6.5 Creedmoor, you already know that consistent seating depth is where a lot of the accuracy lives. The Forster Ultra Micrometer Seater Die is built around that idea. It pairs Forster's bench rest seating design with an ultra-accurate micrometer head, so you can fine tune how deep your bullet sits and get back to that exact setting whenever you want.
The heart of this die is the spring-loaded sliding chamber sleeve. It fully captures the case before the bullet ever starts to seat, holding the case and bullet in straight-line alignment through the whole stroke. That's what keeps runout down and concentricity tight, and reloaders working with Hornady brass and 140-grain ELD bullets have measured runout in the half-thousandth to one-and-a-half thousandth range. This is a non-crimping seater, so it focuses entirely on alignment and depth rather than putting a crimp on the case mouth.
Dialing In the 6.5 Creedmoor Ultra Micrometer Seater
The micrometer head adjusts seating depth in either direction in increments of .001 inch, and it's easily adjustable down to .0005 inch. The white gradation markings are sharp and easy to read, which takes most of the trial and error out of finding the sweet spot off the lands. Once you record your setting, switching bullets and coming back later is as simple as dialing to your noted number.
How the Forster Ultra Seater Fits Your Bench
This die accepts standard 7/8 x 14 threading, so it drops into most single-stage presses. It ships with Forster's Cross Bolt Die Lock Ring, which clamps the split ring shut rather than driving a set screw into the die threads, so it holds its setting without chewing up the die. If you run a Forster Co-Ax press, these dies are right at home and no shell holder is needed. The seating stem is known for a clean fit on high-BC bullets, leaving the bullet nose unmarked even on mildly compressed loads. Every one of these dies is machined to tight tolerances, hand polished, and made in the USA.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): U00062
- UPC: 757253992070
- Caliber: 6.5mm Creedmoor
- Die Type: Seater Die (non-crimping)
- Die Series: Bench Rest
- Adjustment: Micrometer, fine-tunes to .0005 inch, marked in .001 inch increments
- Thread: 7/8 x 14 (standard)
- Lock Ring: Forster Cross Bolt Die Lock Ring included
- Alignment Feature: Spring-loaded sliding/floating chamber sleeve
- Gun Type: Rifle
- Country of Origin: Made in the USA
- Shipping Weight: 0.6 lbs
What’s Included
- One Forster Bench Rest Ultra Micrometer Seater Die
- One Forster Cross Bolt Die Lock Ring
- Storage case
- Instructions
Frequently Asked Questions
How precise can I adjust seating depth with the Forster Ultra Micrometer Seater Die?
The micrometer head adjusts seating depth in either direction and is easily adjustable down to .0005 inch, with gradations clearly marked in .001 inch increments. The bright white markings make it easy to read and record your settings. That means once you find a depth you like, you can note the number and return to it exactly without starting over.
Is this a crimping die?
No, the Ultra Micrometer Seater Die is a non-crimping style seater. It focuses on holding the case and bullet in straight-line alignment while press-fitting the bullet to your chosen depth. If you need a crimp, you would add a separate crimp die to your process.
Will this die work in my press?
It uses standard 7/8 x 14 threading, so it fits most single-stage reloading presses. It also works beautifully in a Forster Co-Ax press, where no shell holder is required. It comes with Forster's Cross Bolt Die Lock Ring, which clamps closed rather than threading a set screw into the die body.
What makes the Forster Ultra Seater produce such concentric rounds?
The key is the spring-loaded sliding chamber sleeve that fully captures the case before the bullet begins to seat, keeping the case and bullet in alignment through the entire stroke. Reloaders using Hornady brass and 140-grain ELD bullets have reported runout in the .0005 to .0015 inch range. The clean seating stem also leaves high-BC bullet noses unmarked, even on mildly compressed loads.


Reviews
There are no reviews yet.