Description
If you handload .243 Winchester and you've ever fought with the old loosen-the-stem, measure, guess-again routine, this die ends that back-and-forth. The Forster Ultra Micrometer Seater Die carries over everything that made Forster's Bench Rest seaters a benchmark for straight-line seating, then adds a micrometer head on top so you can set and reset seating depth with real repeatability. Seat a bullet close, measure your cartridge, dial the micrometer to the exact spot you want, and you're there.
The heart of this die is a spring-loaded sliding chamber sleeve that fully captures the case before the bullet ever starts moving. That means the bullet and case are held in perfect alignment through the whole seating stroke, which is where the low runout and tight concentricity come from. It's a non-crimping seater, so it focuses on seating alone and does it cleanly. Like the rest of the Forster lineup, it's machined from quality steel to tight tolerances and hand polished before and after heat treat, and it wears Forster's cross bolt lock ring that clamps the split ring rather than digging a screw into the die threads.
Why the Micrometer Head Changes Your .243 Load Development
The micrometer adjusts seating depth in clearly marked .001" graduations and can be nudged to roughly .0005" in either direction. The bright white markings are easy to read and easy to record, so chasing the lands on your .243 rifle or jumping between bullet styles becomes a matter of writing down a number and dialing back to it later. That saved setting is the real time-saver when you run more than one projectile through the same rifle.
Dialing In the Forster Ultra Seater for .243 Winchester
This one fits standard 7/8"-14 presses and works great in a Forster Co-Ax, where no shellholder is needed. In any other press, just run the shellholder your press maker recommends. For folks loading precision .243 ammo for varmints, deer, or paper, it's a straightforward upgrade that takes a lot of the guesswork out of consistent cartridge length. Made in the U.S.A.
Key Specifications
- Manufacturer: Forster Products
- Cartridge: .243 Winchester
- Die Type: Ultra Micrometer Bullet Seating Die
- Seating Style: Non-crimping
- Micrometer Graduations: .001" increments, adjustable to .0005"
- Alignment Feature: Spring-loaded sliding chamber sleeve
- Lock Ring: Forster Cross Bolt split lock ring
- Thread Size: 7/8"-14
- Country of Origin: United States
- Manufacturer Part Number: U00034
- UPC: 757253006401
- Shipping Weight: 0.8 lb
What’s Included
- One Forster Bench Rest Ultra Micrometer Seater Die
- One Forster split type lock ring
- Storage case
- Complete instructions
Frequently Asked Questions
How fine can I adjust seating depth with the Forster Ultra Micrometer Seater Die?
The micrometer head is marked in .001" graduations and can be fine-tuned to roughly .0005" in either direction. Seat a bullet close to your target length, measure it, then dial the micrometer to the exact depth you want. The bright white markings make it easy to record a setting and return to it later.
Does this die crimp while it seats?
No, it's a non-crimping seater die. It focuses purely on seating the bullet with the case held in alignment by the sliding chamber sleeve, which is what keeps runout low. If you want a crimp, you'd handle that as a separate step with a dedicated crimp die.
Will the Forster Ultra Seater work in my press?
Yes, it uses a standard 7/8"-14 thread and fits most common reloading presses. In a Forster Co-Ax press you won't need a shellholder, since those presses don't use one. In any other press, just use the shellholder recommended by your press manufacturer.
What makes this Forster seater produce such straight ammo?
It uses a spring-loaded sliding chamber sleeve that fully captures the case before the bullet starts to seat, holding the bullet and case in alignment through the entire stroke. That design is what delivers the low runout and tight concentricity reloaders like for precision .243 loads. The die is also machined to tight tolerances and hand polished for a smooth operation.





Reviews
There are no reviews yet.