0
0

Forster Ultra Micrometer Seater Die .223 Remington U00022

UPC: 757253006364

$118.99

9 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Ultra Micrometer Seater Die for .223 Remington is built for handloaders who care about repeatable seating depth and low runout. It takes everything from Forster's proven Bench Rest seater and adds a micrometer head on top, so you can dial in your overall length precisely and come right back to it later. If you've been chasing seating depth variations with a standard die, this is the kind of tool that quiets all that down.

What Makes the Ultra Micrometer Die Tick

The heart of this die is its floating sleeve design. The sleeve fully captures the case before the bullet ever gets pressed in, holding the case and bullet in perfect alignment through the whole stroke. That straight-line seating is what keeps runout down to a couple thousandths or less, which matters a lot when you're loading for a tight-shooting bolt gun or a tuned AR. The seating stem floats too, so the bullet is guided rather than shoved, and the case mouth stays undeformed. This is a non-crimping seater, so it focuses purely on getting the bullet seated clean and concentric.

Dialing In Your .223 Loads

The micrometer adjustment is the part folks fall in love with. Gradations are marked at .001 inch increments, and you can fine-tune down to roughly .0005 inch in either direction. The white markings are easy to read under shop lighting, and you can adjust seating depth without pulling the die out of the press. Switching between bullet weights or profiles becomes a matter of consulting your notes and giving the dial a twist, so going from a light varmint pill to a heavier match bullet is quick and repeatable.

Fit and Build on the Ultra Micrometer Seater

Machined from hardened steel, this die is made to hold its tolerances for the long haul. It uses standard 7/8-14 threads, so it drops into most single-stage and turret presses. The hardened stem also handles compressed loads better than softer stems that can swell over time. It's a popular pick with precision reloaders loading everything from Hornady ELD and Berger match bullets to standard .223 fare.

Key Specifications

  • Manufacturer: Forster Products
  • Caliber: .223 Remington
  • Die Type: Ultra Micrometer Bullet Seating Die
  • Crimping: Non-crimping
  • Adjustment Gradations: .001 inch increments, adjustable to .0005 inch
  • Alignment System: Floating chamber sleeve and floating seating stem
  • Material: Hardened steel
  • Thread Size: 7/8-14
  • Manufacturer Part Number: U00022
  • UPC: 757253006364
  • Shipping Weight: 0.8 lb

What’s Included

  • Forster Ultra Micrometer Seater Die for .223 Remington
  • Storage box

Frequently Asked Questions

Does the Forster Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater die. It is designed purely for straight-line bullet seating, which helps keep concentricity high and avoids deforming the case mouth. If you need a crimp, you would add a separate crimp die to your process.

Will this die fit my reloading press?

Yes, it uses standard 7/8-14 threads, so it works with most single-stage and turret presses on the market. If you run a Forster Co-Ax press, you won't need a shellholder since those presses don't use one. It's a little on the larger side for compact turret setups, but it still threads in fine.

How precise is the micrometer adjustment on this .223 die?

The micrometer head is marked in .001 inch gradations and lets you fine-tune seating depth to roughly .0005 inch in either direction. Reloaders commonly report runout under a few thousandths once dialed in. You can also note your settings and return to the exact same depth later when switching bullets.

Does the Ultra Micrometer Seater Die work with long VLD and ELD bullets?

The standard seating stem has generous clearance and handles most longer match bullets, including popular Hornady ELD and Berger profiles. Some long-profile VLD bullets may benefit from a VLD-specific seating stem if you want a better fit on the ogive. Forster also offers stem options if you reload specialty bullet shapes.

Additional information

UPC

757253006364

Manufacturer

Manufacturer Part Number

U00022

Shipping Weight

0.8

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die .223 Remington U00022”