Description
The I.T.T.S, short for Improved Tyrant Trigger System, is Tyrant CNC's answer to the mushy factory Glock trigger, built specifically to fit Gen5 pistols. The standout feature here is the reset. A 30% power spring snaps the trigger back into position faster than the stock setup, so the moment the sear re-engages you're ready for the next shot. Tyrant also trimmed the travel, with roughly 15% less take-up and 10% shorter reset distance compared to factory. Out at the range that translates to quicker, more controlled follow-up shots, which is exactly what you want whether you're running drills, shooting a match, or just putting rounds downrange on a Saturday.
The trigger face is a hybrid design that blends a flat face with a curved lower lip. The flat portion encourages a straight-back press for cleaner breaks, while the curve at the bottom gives your finger a natural index point so your placement stays the same every single pull. The slightly taller profile is also a nice bonus for folks with bigger hands who find the stock trigger a little cramped. Construction is CNC machined aluminum paired with stainless steel hardware, and Tyrant uses stainless set screws instead of the usual dowel pins, which makes for a sturdier assembly and easier maintenance down the road.
Installation is straightforward since the I.T.T.S attaches to your existing factory trigger bar, and Tyrant has install videos walking through the whole process. Even buyers who had never worked on their own pistol before report getting it done without much trouble. Fitment covers Gen5 models including the G17, G17L, G19, G19X, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, and G39. The red shoe with black safety blade looks great against a black slide or as an accent piece on a custom build, and the anodized finish holds up well to regular use. Tyrant CNC backs their parts with a lifetime warranty, so this is an upgrade you can install once and not think about again.
Key Specifications
- Manufacturer: Tyrant CNC
- Model: I.T.T.S (Improved Tyrant Trigger System)
- Manufacturer Part Number: TDGTRIG5REDBLACK
- UPC: 602024453499
- Fits: Glock Gen5: G17, G17L, G19, G19X, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, G39
- Color: Red trigger shoe with black safety blade
- Material: CNC machined aluminum with stainless steel hardware
- Finish: Anodized
- Trigger Face: Hybrid flat/curved design
- Reset Spring: 30% power spring for faster reset
- Take-Up: Approx. 15% reduced vs. factory
- Reset Travel: Approx. 10% reduced vs. factory
- Assembly Hardware: Stainless steel set screws (no dowel pins)
- Trigger Bar: Uses existing factory Gen5 trigger bar
- Warranty: Lifetime manufacturer warranty
Frequently Asked Questions
Which Glock models does this trigger fit?
This version is made for Gen5 pistols, including the G17, G17L, G19, G19X, G22, G23, G24, G26, G27, G31, G32, G33, G34, G35, G37, G38, and G39. It does not fit the G43, G43X, or G48, since those slimline models use a different trigger. Tyrant makes a separate trigger for those, and a separate Gen 3/4 version as well.
Does this trigger reduce the pull weight?
Not really, and that's by design. The I.T.T.S is a trigger shoe upgrade that improves feel rather than swapping internals, so it cuts take-up by about 15% and reset travel by about 10% while keeping the pull weight close to factory. The big difference you'll notice is the faster, more positive reset from the 30% power spring and the more consistent finger placement from the hybrid face.
Is this hard to install if I've never worked on my Glock before?
It's very manageable for a first-timer. The trigger attaches to your existing factory trigger bar, and Tyrant CNC has step-by-step install videos on their YouTube channel that walk through the whole process. Plenty of buyers report doing it as their first ever Glock project. As with any trigger work, do a full function check before you load the gun.
Do I need to buy a new trigger bar or any other parts?
No, this trigger uses your existing Gen5 trigger bar, so it's a complete swap right out of the package. The Gen 3/4 version of this trigger is the one that ships with its own bar. No fitting, stoning, or extra springs needed for the Gen5 install.
What's the difference between a flat trigger and this hybrid design?
A pure flat-face trigger promotes a straight-back press but can feel slippery without a reference point for your finger. The I.T.T.S combines a flat upper face with a curved lower lip, so you get the clean break of a flat trigger plus a natural index point that keeps your finger in the same spot every pull. The design also sits a little taller, which tends to feel better for larger hands.
Will the red anodized color hold up over time?
Anodizing is a hard surface treatment, not paint, so it resists wear from normal handling and holster use quite well. One thing worth knowing is that anodized colors can vary slightly between production batches, so the red on yours may be a touch different from photos. Functionally it makes no difference at all.



Reviews
There are no reviews yet.