0
0

Redding Type S-Match Bushing Neck 3-Die Set 6.5 Creedmoor 38446

UPC: 611760384462

$263.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you handload 6.5 Creedmoor and you're the type who keeps a notebook of seating depths and neck tensions, the Redding Type S-Match Bushing Neck Die Set is built for exactly that mindset. This is a three-die package put together for reloaders who prefer to neck size their brass and want real, measurable control over how the case grips the bullet.

The heart of the set is the Type S bushing neck sizing die. It uses interchangeable bushings available in .001 inch increments, so you can tune neck tension to match your brass, your bullet, and your chamber instead of settling for whatever a standard die gives you. The bushing self-centers on the case neck to help concentricity, and the adjustable decapping rod lets you size only part of the neck length when you want it. You get a standard sizing button for running commercial brass as-is, plus a decapping pin retainer so folks who sort or turn necks can skip the button entirely and size purely off the bushing.

What the 6.5 Creedmoor Type S-Match Set Brings to the Bench

Alongside the neck die you get a Redding body die and a Competition seating die. The body die full-length resizes the case body and bumps the shoulder for easy chambering without touching the neck, which comes in handy once brass has been fired and neck-sized a few times and starts getting stubborn to close on. The Competition seater is where this set earns its keep for accuracy work. Its sliding sleeve supports and aligns the case and bullet before seating, and the micrometer head lets you read and repeat changes down to .001 inch or less, so dialing back to a proven load during testing is quick and foolproof.

Getting Set Up With the Type S-Match Dies

A couple of things to plan for: the sizing bushings and the shellholder are sold separately, so you'll want to pick your bushing based on your fired case neck measurement before your first session. The 6.5 Creedmoor uses a .264 bullet diameter and a #1 shellholder. Dies ship in a protective storage box with complete instructions.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 38446
  • UPC: 611760384462
  • Cartridge: 6.5mm Creedmoor
  • Bullet Diameter: .264
  • Die Set Type: Type S-Match Bushing Neck, 3-Die
  • Dies Included: Bushing Neck Sizing Die, Body Die, Competition Seating Die
  • Bushing Increments: .001 inch
  • Seating Adjustment: Micrometer head
  • Material: Case hardened steel
  • Shellholder: #1 (sold separately)
  • Thread: 7/8-14
  • Country of Manufacture: United States

What’s Included

  • Type S bushing neck sizing die (with decapping rod, standard sizing button, and decapping pin retainer)
  • Body die
  • Competition bullet seating die with sliding sleeve and micrometer head
  • Die storage box
  • Instructions

Frequently Asked Questions

Do the sizing bushings come with the Type S-Match set?

No, the neck sizing bushings are sold separately so you can match the exact neck tension your brass and bullets call for. Bushings are offered in .001 inch increments, which lets you fine-tune the fit. You'll want to measure the neck diameter of a loaded or fired case and choose your bushing from there before your first sizing session.

Is a shellholder included with this 6.5 Creedmoor die set?

The shellholder is not included and is purchased separately. The 6.5 Creedmoor uses a Redding #1 shellholder, which also fits several other common cartridges that share the same case head.

What's the difference between the three dies in this set?

The Type S bushing neck die sizes just the case neck and controls neck tension through interchangeable bushings. The body die full-length sizes the case body and bumps the shoulder without touching the neck, which helps when fired brass gets tight to chamber. The Competition seating die uses a sliding sleeve and micrometer head to seat bullets with excellent alignment and repeatable depth.

Can I size only part of the case neck with this die?

Yes. The adjustable decapping rod lets you position the bushing so it sizes only a portion of the neck length if that's what your load prefers. This is a popular approach among reloaders who want to preserve concentricity and reduce case working.

Additional information

UPC

611760384462

Manufacturer

Manufacturer Part Number

38446

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Neck 3-Die Set 6.5 Creedmoor 38446”