0
0

Redding Type S-Match Bushing Neck Die Set 22-250 Rem (38106)

UPC: 611760381065

$242.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Redding's Type S-Match Bushing Neck Die Set is built for the 22-250 Remington reloader who cares about tight groups and long brass life. Instead of working the whole case, this setup lets you neck size with interchangeable bushings so you can dial in exactly how much tension holds the bullet. The result is straighter ammo, less brass stress, and the kind of repeatability that shows up on paper at distance.

What the 22-250 Type S-Match Set Brings to the Bench

This is a three-die package: the Type S Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seating Die. The neck die uses sizing bushings available in .001-inch increments, and the bushing self-centers on the case neck to keep runout low. An adjustable decapping rod lets you size only part of the neck when you want to, and the rod ships with a standard size button plus a decapping pin retainer so you can run it button-free if you sort or turn your necks. The Body Die handles case body resizing and shoulder bump when your brass needs it, which keeps chambering smooth without overworking the case.

Why the Competition Seater Matters

The Competition Bullet Seating Die is where a lot of the accuracy comes from. It uses a spring-loaded sliding sleeve that aligns the case and bullet before seating starts, and a micrometer head that lets you repeat seating depth down to the thousandth. That alignment is what cuts bullet runout and gives you consistent seating from round to round. One thing worth noting from Redding: the competition seater is not meant for heavily compressed loads, so keep that in mind if you're running max case fill.

Setting Up Your 22-250 Reloading

Keep in mind that bushings and the shellholder are sold separately, so you'll want to pick up the right bushing for your brass thickness and bullet diameter to get the neck tension you're after. For the 22-250 Remington, that typically means mic'ing a loaded round's neck and ordering a bushing a couple thousandths under. Once you're dialed in, this set rewards the effort with clean, concentric, match-grade ammo.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 38106
  • UPC: 611760381065
  • Caliber: 22-250 Remington
  • Die Set Type: Type S-Match Bushing Neck (3-Die)
  • Bullet Diameter: .224
  • Material: Case Hardened Steel
  • Bushing Increments: .001 inch
  • Seating Die: Competition micrometer with sliding sleeve
  • Thread: 7/8"-14
  • Shellholder: #1 (sold separately)
  • Bushings: Sold separately

What’s Included

  • Type S Bushing Neck Sizing Die (with decapping rod, standard size button, and decapping pin retainer)
  • Body Die
  • Competition Bullet Seating Die (micrometer head and sliding sleeve)
  • Plastic storage box
  • Instructions

Frequently Asked Questions

Does the Type S-Match Neck Die Set come with bushings?

No, bushings are sold separately and Redding does not ship them from the factory. You'll choose a bushing in .001-inch increments based on your brass neck thickness and the bullet you're loading. A good starting point is measuring the neck diameter of a loaded round and ordering a bushing about two thousandths smaller.

What dies are in the 22-250 Type S-Match set?

This is a three-die set that includes the Type S Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seating Die. The neck die handles neck tension with interchangeable bushings, the Body Die resizes the case body and bumps the shoulder, and the Competition Seater gives you precise, repeatable seating depth.

Do I need a shellholder for this die set?

Yes, and it's not included. The 22-250 Remington uses a #1 shellholder, which you'll need to pair with any standard single-stage press to run these dies.

Can I use the Competition Seating Die with compressed loads?

Redding recommends against it. The seating stem and sliding sleeve are machined to precision tolerances with thin walls, so heavily compressed charges can stress the components. For compressed loads, a standard seating die is the better choice.

Additional information

UPC

611760381065

Manufacturer

Manufacturer Part Number

38106

Reviews

There are no reviews yet.

Be the first to review “Redding Type S-Match Bushing Neck Die Set 22-250 Rem (38106)”