0
0

Redding Type S Bushing Neck Sizing Die 6mm Rem | MPN 71115

UPC: 611760711152

$65.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Reloaders chasing consistency in 6mm Remington know that neck tension is one of the biggest levers you can pull for better accuracy. The Redding Type S Bushing Neck Sizing Die hands you full control over that variable. Instead of a one-size-fits-all expander, it uses interchangeable sizing bushings so you can tune how much the case neck gets squeezed down, which pays off in more uniform bullet seating and tighter groups downrange.

How the Type S Neck Die Earns Its Keep

The heart of this die is the bushing system. You pick a bushing sized to your brass and the neck tension you're after, and because they're available in .001 inch increments, you can get dialed in without guessing. The bushing floats and self-centers on the case neck, which helps hold concentricity and keeps runout low. The adjustable decapping rod also lets you size only part of the neck length if that's how you like to run things.

Matching the Die to Your Brass

Neck wall thickness varies from one brass maker to the next, so most 6mm Rem reloaders end up with a small selection of bushings to cover different lots or brands. A common starting point is measuring a loaded round's neck diameter and subtracting your desired tension, usually around .001 to .003 inch depending on whether you're single-feeding a bolt gun or running from the magazine. Keep in mind the bushings and shell holder are sold separately, so you'll want to grab the right bushing for your setup.

Built the Redding Way

This is precision reloading gear through and through. The die comes with a standard size button on the decapping rod, which is handy for folks loading commercial brass as it comes from the box. It also includes a decapping pin retainer, so if you sort or turn your necks for uniformity, you can run the die without the button and let the bushing do all the sizing. It's a thoughtful setup that works whether you're a methodical benchrest loader or just want cleaner, more repeatable ammo for your 6mm Rem.

Key Specifications

  • Manufacturer: Redding
  • Manufacturer Part Number: 71115
  • UPC: 611760711152
  • Cartridge: 6mm Remington
  • Die Type: Type S Bushing Neck Sizing Die
  • Bushing System: Interchangeable, .001 inch increments (sold separately)
  • Decapping Rod: Adjustable, with standard size button
  • Decapping Pin Retainer: Included
  • Concentricity Feature: Self-centering bushing
  • Gun Type: Rifle

What’s Included

  • One Redding Type S Bushing Neck Sizing Die (6mm Remington)
  • Adjustable decapping rod with standard size button
  • Decapping pin retainer
  • Die box
  • Instructions

Frequently Asked Questions

Do bushings come with the Type S Bushing Neck Die?

No, the bushings are sold separately. The die uses interchangeable bushings available in .001 inch increments so you can pick the exact neck tension you want. Since neck wall thickness varies between brass brands, most reloaders keep a small selection of bushings on hand.

What bushing size should I get for 6mm Remington?

The right bushing depends on your brass and the neck tension you're after. A good method is to measure the neck diameter of a loaded round and subtract your desired tension, commonly .001 to .003 inch. If you're loading from a magazine you'll generally want a touch more tension than a single-fed bolt gun.

Does this die size the whole case or just the neck?

This is a neck sizing die, so it works the case neck only and leaves the body and shoulder alone. That's ideal for brass that's fire-formed to your chamber and reloaded for the same rifle. If you also need to size the body and bump the shoulder, you'd pair it with a body die or step up to a Type S full length version.

What is the decapping pin retainer used for?

The retainer lets you run the die without the standard size button. That's useful if you sort or turn your case necks for uniformity, because the bushing then handles all the neck sizing for maximum consistency. The die ships with both the button and the retainer so you can set it up either way.

Additional information

UPC

611760711152

Manufacturer

Manufacturer Part Number

71115

Reviews

There are no reviews yet.

Be the first to review “Redding Type S Bushing Neck Sizing Die 6mm Rem | MPN 71115”