Description
If you're loading 338 Lapua Magnum for long range work, controlling neck tension is where a lot of the accuracy magic happens. The Redding Type S Bushing Neck Sizing Die gives you a straightforward way to do exactly that. Instead of a fixed sizing diameter, it uses interchangeable bushings available in .001" increments, letting you tune neck tension to the wall thickness of the brass you're running. The bushing is free to float and self-center on the case neck, which helps keep everything concentric and your runout low.
What the Type S 338 Lapua Die Brings to the Bench
The adjustable decapping rod is the other half of the story here. You can set it to size only part of the neck length if you want, and because the rod comes with a standard size button, it works great for folks loading commercial brass as it comes. The whole Type S line grew out of benchrest and 1000 yard competition, so this is purpose-built gear aimed at reloaders chasing repeatable precision rather than just plinking ammo.
Tuning Neck Tension With the 338 Lapua Bushing Die
For anyone who sorts or turns their case necks, a decapping pin retainer is included so you can neck size without the size button entirely. That flexibility is a big reason this die is a favorite among serious 338 Lapua loaders. To pick the right bushing, measure the outside neck diameter of a loaded round and subtract about .002" to allow for brass springback and proper bullet grip. For this cartridge, bushings generally fall in the .360" to .368" range depending on your brass and prep.
Keep in mind the sizing bushings and shellholder are sold separately, so you'll want to grab the correct bushing and a #35 shellholder to get rolling. Redding offers bushings in both heat-treated steel and titanium nitride if you want to reduce drag and stress on your brass.
Key Specifications
- Manufacturer: Redding
- Manufacturer Part Number: 71594
- UPC: 611760715945
- Cartridge: .338 Lapua Magnum
- Die Type: Type S Bushing Neck Sizing Die
- Bullet Diameter: 0.338"
- Bushing Increments: .001"
- Bushing Range: 0.360" to 0.368"
- Standard Shellholder: #35
- Lock Ring Thread: 7/8"-14
- Material: Case Hardened Steel
- Decapping Rod: Adjustable, with standard size button
What’s Included
- Type S bushing neck sizing die
- Adjustable decapping rod with standard size button
- Decapping pin retainer
- Spare decapping pin
- Plastic storage box
Frequently Asked Questions
Does the Type S 338 Lapua die come with bushings?
No, the sizing bushings are sold separately. This lets you choose the exact bushing size to match your brass and desired neck tension. Redding offers them in both heat-treated steel and titanium nitride in .001" increments.
What bushing size do I need for 338 Lapua Magnum?
The simplest method is to measure the outside neck diameter of a loaded round and subtract about .002" to allow for brass springback. For 338 Lapua, bushings typically land somewhere in the .360" to .368" range depending on your brass and whether you turn necks. Measuring your own loaded ammo is always the way to nail it down.
Do I need a shellholder with this Redding die?
Yes, the shellholder is not included. For 338 Lapua Magnum you'll want a #35 shellholder to run this die on your press.
Can this die neck size without the size button?
It can. The included decapping pin retainer lets you neck size without using the size button, which is ideal if you sort or turn your case necks for uniformity. For loaders running commercial brass as it comes, the standard size button is ready to go right out of the box.



Reviews
There are no reviews yet.